1

pulg

2025-06-26 c7cc6a7851eb8c3caa697d3a8382a1ff09db2586

 HH.WCS.QingXiNongfu/core/Monitor.cs

@@ -95,7 +95,7 @@
                        {
                            if (item.SQL_State != "完成")
                            {
                                ROW_LOCK(LocationHelper.GetLocList(x => x.S_AREA_CODE == item.start_area && x.N_ROW == srow).FirstOrDefault(), LocationHelper.GetLocList(x => x.S_AREA_CODE == item.end_area && x.N_ROW == erow).FirstOrDefault(), "", 0, string.IsNullOrEmpty(item.FROM_NO));
                                ROW_LOCK(LocationHelper.GetLocList(x => x.S_AREA_CODE == item.start_area && x.N_ROW == srow).FirstOrDefault(), LocationHelper.GetLocList(x => x.S_AREA_CODE == item.end_area && x.N_ROW == erow).FirstOrDefault(), "", 0, string.IsNullOrEmpty(item.FROM_NO), item.SQL_WorkNo);
                                WCSHelper.Do(db =>
                                {
                                    LogHelper.Info("移库工单数量完成" + item.SQL_WorkNo);
@@ -118,7 +118,7 @@
                        {
                            LogHelper.Info($"{item.Turn_Type}工单{item.SQL_WorkNo} 手动完成，处理解锁,");

                            ROW_LOCK(LocationHelper.GetLocList(x => x.S_AREA_CODE == item.start_area && x.N_ROW == srow).FirstOrDefault(), LocationHelper.GetLocList(x => x.S_AREA_CODE == item.end_area && x.N_ROW == erow).FirstOrDefault(), "", 0, string.IsNullOrEmpty(item.FROM_NO));
                            ROW_LOCK(LocationHelper.GetLocList(x => x.S_AREA_CODE == item.start_area && x.N_ROW == srow).FirstOrDefault(), LocationHelper.GetLocList(x => x.S_AREA_CODE == item.end_area && x.N_ROW == erow).FirstOrDefault(), "", 0, string.IsNullOrEmpty(item.FROM_NO), item.SQL_WorkNo);
                            WCSHelper.Do(db =>
                            {
                                if (item.Turn_Type == "自动移库")
@@ -178,7 +178,7 @@
                            {
                                //LocationHelper.SetRowLock(new RowLock { S_AREA_CODE = item.start_row, N_ROW = srow }, 0);
                                //LocationHelper.SetRowLock(new RowLock { S_AREA_CODE = item.end_row, N_ROW = erow }, 0);
                                ROW_LOCK(LocationHelper.GetLocList(x => x.S_AREA_CODE == item.start_area && x.N_ROW == srow).FirstOrDefault(), LocationHelper.GetLocList(x => x.S_AREA_CODE == item.end_area && x.N_ROW == erow).FirstOrDefault(), "", 0, string.IsNullOrEmpty(item.FROM_NO));
                                ROW_LOCK(LocationHelper.GetLocList(x => x.S_AREA_CODE == item.start_area && x.N_ROW == srow).FirstOrDefault(), LocationHelper.GetLocList(x => x.S_AREA_CODE == item.end_area && x.N_ROW == erow).FirstOrDefault(), "", 0, string.IsNullOrEmpty(item.FROM_NO), item.SQL_WorkNo);

                                LogHelper.Info($"{item.Turn_Type}工单,完成" + item.SQL_WorkNo + "起排无货 或 终排已满 无法移库");
                                item.SQL_State = "完成";
@@ -302,7 +302,7 @@
                        {
                            //LocationHelper.SetRowLock(new RowLock { S_AREA_CODE = item.start_row, N_ROW = srow }, 0);
                            //LocationHelper.SetRowLock(new RowLock { S_AREA_CODE = item.end_row, N_ROW = erow }, 0);
                            ROW_LOCK(LocationHelper.GetLocList(x => x.S_AREA_CODE == item.start_area && x.N_ROW == srow).FirstOrDefault(), LocationHelper.GetLocList(x => x.S_AREA_CODE == item.end_area && x.N_ROW == erow).FirstOrDefault(), "", 0, string.IsNullOrEmpty(item.FROM_NO));
                            ROW_LOCK(LocationHelper.GetLocList(x => x.S_AREA_CODE == item.start_area && x.N_ROW == srow).FirstOrDefault(), LocationHelper.GetLocList(x => x.S_AREA_CODE == item.end_area && x.N_ROW == erow).FirstOrDefault(), "", 0, string.IsNullOrEmpty(item.FROM_NO), item.SQL_WorkNo);
                            LogHelper.Info($"{item.Turn_Type}工单,完成" + item.SQL_WorkNo + "起点已经没有货了，移库完成");
                            item.SQL_State = "完成";
                            item.Note = "起点已经没有货了，移库完成";
@@ -321,7 +321,7 @@
                        {
                            //LocationHelper.SetRowLock(new RowLock { S_AREA_CODE = item.start_row, N_ROW = srow }, 0);
                            //LocationHelper.SetRowLock(new RowLock { S_AREA_CODE = item.end_row, N_ROW = erow }, 0);
                            ROW_LOCK(LocationHelper.GetLocList(x => x.S_AREA_CODE == item.start_area && x.N_ROW == srow).FirstOrDefault(), LocationHelper.GetLocList(x => x.S_AREA_CODE == item.end_area && x.N_ROW == erow).FirstOrDefault(), "", 0, string.IsNullOrEmpty(item.FROM_NO));
                            ROW_LOCK(LocationHelper.GetLocList(x => x.S_AREA_CODE == item.start_area && x.N_ROW == srow).FirstOrDefault(), LocationHelper.GetLocList(x => x.S_AREA_CODE == item.end_area && x.N_ROW == erow).FirstOrDefault(), "", 0, string.IsNullOrEmpty(item.FROM_NO), item.SQL_WorkNo);
                            LogHelper.Info($"{item.Turn_Type}工单,完成" + item.SQL_WorkNo + "终点满了，移库完成");
                            item.SQL_State = "完成";
                            item.Note = "终点满了，移库完成";
@@ -418,11 +418,26 @@
            }
        }

        static void ROW_LOCK(Location startBit, Location EndBit, string msg, int sign, bool up = true)
        static void ROW_LOCK(Location startBit, Location EndBit, string msg, int sign, bool up = true, string WorkNo = "")
        {
            LogHelper.Info("dooooooooooooooooooooooooooooooooooooooooooooo" + msg + "---" + sign);
            LogHelper.Info("移库解锁 doo" + msg + "---" + sign + "--" + WorkNo);
            LogHelper.Info(JsonConvert.SerializeObject(startBit));
            LogHelper.Info(JsonConvert.SerializeObject(EndBit));
            bool j解锁起点库区排 = true;
            if (!string.IsNullOrEmpty(WorkNo) && sign == 0)
            {
                //解锁时，有工单号。  查查除了这个工单号以外的其他 指定出库排执行
                var orders = WCSHelper.GetWorkOrder2();
                var thisOrder = orders.Find(x => x.SQL_WorkNo == WorkNo);
                LogHelper.Info("移库解锁 --当前工单 sid:" + thisOrder?.S_ID);
                if (thisOrder != null)
                {
                    var other = orders.Find(x => x.SQL_WorkNo != WorkNo && x.start_area == thisOrder.start_area && x.start_row == thisOrder.start_row);
                    LogHelper.Info($"移库解锁 --其他工单 x.start_area == {thisOrder.start_area} start_row == {thisOrder.start_row} SID:" + other?.S_ID);
                    if (other != null)
                        j解锁起点库区排 = false;
                }
            }
            //if (sign == 1)
            //{
            //    if (LocationHelper.GetRowLock(x => x.S_AREA_CODE == startBit.S_AREA_CODE && x.N_ROW == startBit.N_ROW).Count > 0)
@@ -430,7 +445,8 @@
            //        return;
            //    }
            //}
            LocationHelper.SetRowLock(new RowLock { S_AREA_CODE = startBit.S_AREA_CODE, N_ROW = startBit.N_ROW, S_LOCK_STATE = msg }, sign);
            if (j解锁起点库区排)
                LocationHelper.SetRowLock(new RowLock { S_AREA_CODE = startBit.S_AREA_CODE, N_ROW = startBit.N_ROW, S_LOCK_STATE = msg }, sign);
            LocationHelper.SetRowLock(new RowLock { S_AREA_CODE = EndBit.S_AREA_CODE, N_ROW = EndBit.N_ROW, S_LOCK_STATE = msg }, sign);
            //if (EndBit == null || EndBit.S_AREA_CODE.StartsWith("BHQ-"))
            //    return;
@@ -439,9 +455,12 @@
                {
                    case 0:
                        {
                            var lst = new List<string> { startBit.S_Fule_LOC, EndBit.S_Fule_LOC };
                            if (!j解锁起点库区排)
                                lst = new List<string> { EndBit.S_Fule_LOC };
                            var req = JsonConvert.SerializeObject(new
                            {
                                areaNum = new List<string> { startBit.S_Fule_LOC, EndBit.S_Fule_LOC },
                                areaNum = lst,
                                repoNo = Settings.repoNo,
                                areaLock = "2"
                            });
@@ -1055,6 +1074,7 @@
                        }
                    }
                    if (dsll.Any())
                    {
                        foreach (var r in dsll)
                        {
                            foreach (var rows in r.Value.GroupBy(x => x.N_ROW).OrderBy(x => x.Key))
@@ -1085,6 +1105,19 @@
                                        //else
                                        var ccr = _clrel0.S_TYPE.Split(',');
                                        string EdnRarea = ccr.First();

                                        if (EdnRarea == "YWLBQWJ" || EdnRarea == "YWLWJJB")//到B区的移库工单最多只能生成两条任务
                                        {
                                            //查询任务数 
                                            List<string> AreaLi = new List<string>() { "YWLBQWJ", "YWLWJJB" };
                                            var db = new SqlHelper<object>().GetInstance();
                                            var list = db.Queryable<Location>().Where(a => AreaLi.Contains(a.S_AREA_CODE) && a.S_LOCK_STATE == "入库锁").ToList();
                                            if (list.Count() >= 2)
                                            {
                                                LogHelper.Info($"CreateTransport-  CreateTask Error" + $"终点库区为YWLRGDD或者YWLWJJB 则最多只能生成两个任务");
                                                continue;
                                            }
                                        }
                                        string Last = string.Join(",", ccr.Skip(1));

                                        if (ABlist.Contains(EdnRarea))
@@ -1102,12 +1135,23 @@
                                        var cir1 = cntritems.First();

                                        var arloclist = LocationHelper.GetAreaNormalLocList(EdnRarea);// LocationHelper.GetList<Location>(x => x.S_AREA_CODE == _clrel0.S_TYPE && x.S_LOCK_STATE != "报废");

                                        //有移库工单 排除移库工单上所对应的排
                                        var order = LocationHelper.GetList<YWLZXtake>(X => X.S_ZX_STATE == "执行").ToList();
                                        if (order.Count() > 0)
                                        {
                                            foreach (var item in order)
                                            {
                                                LogHelper.Info($"有移库工单排除对应的库区{item.S_START_AREA} 排{item.N_START_ROW}");
                                                arloclist.RemoveAll(e => e.S_AREA_CODE == item.S_START_AREA && e.N_ROW == item.N_START_ROW);
                                            }
                                        }
                                        if (arloclist.Any())
                                        {
                                            if (EdnRarea == "YWLWJJB")//纸箱无菌接驳区
                                            //    InworkLock = true;
                                            //else InworkLock = false;
                                            //if (od.S_ZZ_AREA == "YWLWJJB")
                                                                      //    InworkLock = true;
                                                                      //else InworkLock = false;
                                                                      //if (od.S_ZZ_AREA == "YWLWJJB")
                                            {
                                                if (InworkLock)
                                                    continue;
@@ -1124,7 +1168,10 @@
                                            {
                                                isCd = true;
                                                inlockLis = LocationHelper.GetList<RowLock>(x => x.S_AREA_CODE == EdnRarea && x.S_LOCK_SRC == cir1.S_ITEM_CODE + cir1.S_ITEM_NAME + cir1.S_CJ_NAME && x.S_LOCK_STATE == "入库锁").ToList();
                                                inlock = inlockLis.FirstOrDefault();
                                                if (inlockLis.Count() > 0)
                                                {
                                                    inlock = inlockLis.FirstOrDefault();
                                                }
                                                if (inlock != null)
                                                {
                                                    //当入库的任务能放满一排并且还有余的时候 开第二排
@@ -1136,7 +1183,7 @@
                                                        LogHelper.Info($"查起点有多少同品种的物料 开始");
                                                        var ca = Expressionable.Create<Location, LocCntrRel, CntrItemRel>();
                                                        ca.And((o, p, t) => o.N_CURRENT_NUM > 0 && o.S_LOCK_STATE == "无" && t.S_ITEM_CODE == cir1.S_ITEM_CODE && t.S_ITEM_NAME == cir1.S_ITEM_NAME && t.S_CJ_NAME == cir1.S_CJ_NAME && o.S_AREA_CODE == "YWLRGDD" && p.S_TYPE == _clrel0.S_TYPE);
                                                        var lstCanOutL = dbll.Queryable<Location>().InnerJoin<LocCntrRel>((o, p) => o.S_LOC_CODE == p.S_LOC_CODE).InnerJoin<CntrItemRel>((o, p, t) => p.S_CNTR_CODE == t.S_CNTR_CODE).Where(ca.ToExpression()).Includes(e => e.LocCntrRel, p => p.CntrItemRel).ToList();
                                                        var lstCanOutL = dbll.Queryable<Location>().InnerJoin<LocCntrRel>((o, p) => o.S_LOC_CODE == p.S_LOC_CODE).InnerJoin<CntrItemRel>((o, p, t) => p.S_CNTR_CODE == t.S_CNTR_CODE).Where(ca.ToExpression()).ToList();
                                                        LogHelper.Info($"起点要入CD的有多少托盘数量为{lstCanOutL.Count()}");
                                                        //判断终点排能入多少  少于入库托盘数则多开一排 EndMum 
                                                        var EndMum = dbll.Queryable<Location>().Where(l => l.S_AREA_CODE == EdnRarea && l.N_CURRENT_NUM == 0 && l.S_LOCK_STATE == "无" && inlockLis.Select(e => e.N_ROW).ToList().Contains(l.N_ROW)).ToList();
@@ -1223,6 +1270,7 @@
                                                if (res && inlock == null && isCd)
                                                {
                                                    var rrrr = new RowLock { S_LOCK_SRC = cir1.S_ITEM_CODE + cir1.S_ITEM_NAME + cir1.S_CJ_NAME, T_LOCK_TIME = DateTime.Now, S_LOCK_STATE = "入库锁", S_AREA_CODE = endbit.S_AREA_CODE, N_ROW = endbit.N_ROW };
                                                    LogHelper.Info($"原物料入库 添加排锁信息{JsonConvert.SerializeObject(rrrr)} ");
                                                    WCSHelper.Do(db => db.Insertable(rrrr).ExecuteCommand());
                                                }
                                                if (EdnRarea == "YWLWJJB") InworkLock = false;
@@ -1234,7 +1282,11 @@
                                }
                            }
                        }
                    else if (InworkLock) InworkLock = false;
                    }
                    else if (InworkLock)
                    {
                        InworkLock = false;
                    }
                }
                catch (Exception ex)
                {
@@ -1315,12 +1367,20 @@
                                           S_NOTE = cir.S_ITEM_CODE.Trim() + "&" + cir.S_ITEM_NAME.Trim(),
                                           S_ITEM_CODE = cir.S_ITEM_CODE,
                                           S_ITEM_NAME = cir.S_ITEM_NAME,
                                           S_BATCH_NO = cir.S_BATCH_NO,
                                           S_CJ_NAME = cir.S_CJ_NAME,
                                           S_CNTR_CODE = cir.S_CNTR_CODE
                                       })
                                       .ToList();
            /// 人工堆叠区纸箱 和 标签 是按标识+物料筛选进行入库转运。 
            /// 物料名称包含对应种类进行入库。
            foreach (var item in locsFirstA)
            {
                if (!string.IsNullOrEmpty(item.S_BATCH_NO))
                {
                    item.S_NOTE = item.S_NOTE + "&" + item.S_BATCH_NO;
                }
            }
            var locsFirst = locsFirstA.FindAll(x => x.S_NOTE.Contains("标签-") && x.S_TYPE == WJ_BQ.RK_BBHJQ);
            var SlocsFirst = locsFirstA.FindAll(x => x.S_NOTE.Contains("标签-") && x.S_TYPE == SX_BQ.RK_BBHJQ);
            var TKlocsFirst = locsFirstA.FindAll(x => x.S_NOTE.Contains("提扣-"));
@@ -1462,6 +1522,7 @@
                                string v = "YWLTKMKQ";
                                var rklist = LocationHelper.GetRowLock(v);
                                int hof = (s_type == .5 ? 1 : (s_type == .75 ? 2 : 3));

                                var inlock = rklist.Find(x => x.S_LOCK_SRC == (cir.S_ITEM_CODE.Trim() + "&" + cir.S_ITEM_NAME.Trim() + hof) && x.S_LOCK_STATE.Contains("入库锁"));
                                Location EndBit = null;
                                var NormalList = LocationHelper.GetAreaNormalLocList(v);
@@ -2024,7 +2085,10 @@
        private static void YwlPETK_CreInwork(List<locCntItem> klocsFirst, string v, string v2, int v1 = 3)
        {
            bool ord = v2.Contains("提扣");
            foreach (var ptR in klocsFirst.GroupBy(x => x.N_ROW).OrderBy(x => x.Key))
            var chi = new SqlHelper<object>().GetInstance();
            var newDb = chi.CopyNew();
            var yx = klocsFirst.GroupBy(x => x.N_ROW).OrderBy(x => x.Key).ToList();
            foreach (var ptR in klocsFirst.GroupBy(x => x.N_ROW).OrderBy(x => x.Key).ToList())
            {
                Location EndBit = null;
                var rsfull = ptR.OrderBy(X => X.N_COL).ToList().FindAll(x => x.N_CURRENT_NUM > 0).LastOrDefault();
@@ -2048,11 +2112,40 @@
                    }
                    else
                    {
                        var hasNum = NormalList.FindAll(x => x.N_CURRENT_NUM > 0).Select(x => x.N_ROW).Distinct();
                        var hasNum = NormalList.FindAll(x => x.N_CURRENT_NUM > 0).Select(x => x.N_ROW).Distinct().ToList();
                        var EptRowlist = NormalList.FindAll(x => !hasNum.Contains(x.N_ROW));
                        if (EptRowlist.Any())
                        {
                            EndBit = EptRowlist.GroupBy(x => x.N_ROW).OrderBy(x => x.Key * (ord ? 1 : -1)).FirstOrDefault().ToList().OrderBy(x => x.N_COL).FirstOrDefault();
                        }
                        else
                        {
                            if (hasNum.Any())
                            {
                                //有相同物料 相同标签的继续入
                                List<Location> lstCanOutL = new List<Location>();
                                if (!string.IsNullOrEmpty(rsfull.S_BATCH_NO))
                                {
                                    lstCanOutL = newDb.Queryable<Location>().InnerJoin<LocCntrRel>((o, p) => o.S_LOC_CODE == p.S_LOC_CODE).InnerJoin<CntrItemRel>((o, p, t) => p.S_CNTR_CODE == t.S_CNTR_CODE).Where((o, p, t) => o.S_AREA_CODE == v && o.N_CURRENT_NUM > 0 && o.S_LOCK_STATE == "无" && hasNum.Contains(o.N_ROW) && t.S_ITEM_CODE == rsfull.S_ITEM_CODE && t.S_ITEM_NAME == rsfull.S_ITEM_NAME && t.S_BATCH_NO == rsfull.S_BATCH_NO).ToList();

                                }
                                else
                                {
                                    lstCanOutL = newDb.Queryable<Location>().InnerJoin<LocCntrRel>((o, p) => o.S_LOC_CODE == p.S_LOC_CODE).InnerJoin<CntrItemRel>((o, p, t) => p.S_CNTR_CODE == t.S_CNTR_CODE).Where((o, p, t) => o.S_AREA_CODE == v && o.N_CURRENT_NUM > 0 && o.S_LOCK_STATE == "无" && hasNum.Contains(o.N_ROW) && t.S_ITEM_CODE == rsfull.S_ITEM_CODE && t.S_ITEM_NAME == rsfull.S_ITEM_NAME && string.IsNullOrEmpty(t.S_BATCH_NO)).ToList();
                                }
                                if (lstCanOutL.Any())
                                {
                                    var loclist1 = NormalList.FindAll(x => lstCanOutL.Select(f => f.N_ROW).Distinct().ToList().Contains(x.N_ROW));
                                    foreach (var rs in loclist1.GroupBy(x => x.N_ROW).OrderBy(x => x.Key * (ord ? 1 : -1)))
                                    {
                                        var srloclist = rs.OrderBy(x => x.N_COL).ToList();
                                        var lastfull = srloclist.FindAll(x => x.N_CURRENT_NUM > 0).LastOrDefault();
                                        EndBit = srloclist.Find(x => x.S_LOCK_STATE == "无" && x.N_CURRENT_NUM < Math.Min(x.N_CAPACITY, v1) && x.S_LOCK_STATE != "报废" && x.N_COL >= (lastfull?.N_COL ?? 0));
                                        if (EndBit != null)
                                            break;
                                    }
                                }
                            }
                        }
                    }
                    if (EndBit != null)
@@ -2060,29 +2153,29 @@
                        var res = TaskProcess.CreateTransport("", rsfull.S_LOC_CODE.Trim(), EndBit.S_LOC_CODE, v2 + "-入库", new List<string> { rsfull.S_CNTR_CODE }, rsfull.N_CURRENT_NUM, EndBit.N_CURRENT_NUM + 1, 1, 62);
                        LogHelper.CSucessLog($"from {rsfull.S_LOC_CODE} to {EndBit.S_LOC_CODE} {(v2 + "-入库")} ，创建{res} ");

                        if (res && inlock == null)
                        {
                            var r = new RowLock { S_LOCK_SRC = rsfull.S_NOTE + rsfull.HalfOrFull, T_LOCK_TIME = DateTime.Now, S_LOCK_STATE = "入库锁", S_AREA_CODE = EndBit.S_AREA_CODE, N_ROW = EndBit.N_ROW };
                            var db = new SqlHelper<object>().GetInstance();
                            db.Insertable(r).ExecuteCommand();
                            //else
                            //{
                            //    if (inlock.N_ROW != EndBit.N_ROW)
                            //    {
                            //        db.Deleteable(inlock).ExecuteCommand();
                            //        var row = db.Queryable<RowLock>().Where(x => x.S_AREA_CODE == r.S_AREA_CODE && r.N_ROW == x.N_ROW).First();
                            //        if (row != null)
                            //        {
                            //            if (row.S_LOCK_SRC != r.S_LOCK_SRC)
                            //            {
                            //                db.Deleteable(row).ExecuteCommand();
                            //                db.Insertable(r).ExecuteCommand();
                            //            }
                            //        }
                            //        else db.Insertable(r).ExecuteCommand();
                            //    }
                            //}
                        }
                        //if (res && inlock == null)
                        //{
                        //    var r = new RowLock { S_LOCK_SRC = rsfull.S_NOTE + rsfull.HalfOrFull, T_LOCK_TIME = DateTime.Now, S_LOCK_STATE = "入库锁", S_AREA_CODE = EndBit.S_AREA_CODE, N_ROW = EndBit.N_ROW };
                        //    var db = new SqlHelper<object>().GetInstance();
                        //    db.Insertable(r).ExecuteCommand();
                        //    //else
                        //    //{
                        //    //    if (inlock.N_ROW != EndBit.N_ROW)
                        //    //    {
                        //    //        db.Deleteable(inlock).ExecuteCommand();
                        //    //        var row = db.Queryable<RowLock>().Where(x => x.S_AREA_CODE == r.S_AREA_CODE && r.N_ROW == x.N_ROW).First();
                        //    //        if (row != null)
                        //    //        {
                        //    //            if (row.S_LOCK_SRC != r.S_LOCK_SRC)
                        //    //            {
                        //    //                db.Deleteable(row).ExecuteCommand();
                        //    //                db.Insertable(r).ExecuteCommand();
                        //    //            }
                        //    //        }
                        //    //        else db.Insertable(r).ExecuteCommand();
                        //    //    }
                        //    //}
                        //}
                    }
                    Thread.Sleep(1000);
                }
@@ -3593,65 +3686,175 @@
            public int Row { get; set; }

        }

        /// <summary>
        /// 原物料纸箱出库
        /// AB区物料不足自动转运
        /// </summary>
        public static void AutoRun13TSJ()
        public static void ZdzyABArea()
        {
            Action<YWLWorkOrder> _sAB没物料或者余量不足开始触发跟根据自动转运_名字越长越好 = (od) =>
            try
            {
                LogHelper.Info($"AutoRun13TSJ{od.SQL_WorkNo}对应工单的{od.S_ROW} 物料数量不足。触发转运。");
                // 先看是否有到该库区的转运任务。 
                var zxs = LocationHelper.GetList<YWLZXtake>(X => X.S_ZX_STATE == "执行" && X.S_END_AREA == od.S_ROW);
                //1.查看物料是否匹配。
                var itemTRUN = zxs.Any(x => x.S_ITEM_CODE == od.SQL_ItemCode && x.S_ITEM_NAME == od.SQL_ItemName && x.S_CJ_NAME == od.S_CJ_NAME);
                if (itemTRUN)
                {  //有到该库区的 物料转运任务了。 不需要继续了 。

                    LogHelper.Info($"AutoRun13TSJ{od.SQL_WorkNo}已经存在转运了无需触发转运。");
                    return;
                }
                //人工转运没指定物料，我会自动写回转运单 物料数据。

                //找CD 区 哪里有这个物料。 
                Dictitems TrunStart = null;
                foreach (var area in CDlist)
                var chi = new SqlHelper<object>().GetInstance();
                var newDb = chi.CopyNew();
                foreach (var PLC in Settings.GetDeviceInfoList().FindAll(X => X.deviceType == 13 && X.enable == 1))
                {
                    if (dsi.TryGetValue(area, out var dictitems1))
                    string pline = PLC.deviceName;
                    if (PLC.deviceName.Contains("T2"))
                        pline = "T2提升机-纸箱";

                    var orkOrd = LocationHelper.GetList<YWLWorkOrder>(x => x.SQL_PLineNo == pline && x.WorkType == 6 && x.SQL_State == "执行中");
                    if (orkOrd.Any())
                    {
                        var arearowsloc = LocationHelper.GetAreaNormalLocList(area);
                        foreach (var d in dictitems1.FindAll(x => x.ItemCode == od.SQL_ItemCode && x.ItemName == od.SQL_ItemName && x.S_CJ_NAME == od.S_CJ_NAME))
                        foreach (var od in orkOrd)
                        {
                            if (arearowsloc.Exists(x => x.N_ROW == d.Row))
                            var loclist = LocationHelper.GetLocList(x => x.S_AREA_CODE == od.S_ROW);
                            //查询可用货位有多少
                            List<string> Ky = new List<string>() { "无", "出库锁", "入库锁" };
                            var loclistK = loclist.FindAll(x => Ky.Contains(x.S_LOCK_STATE)).Count();
                            var count = loclist.FindAll(x => x.N_CURRENT_NUM > 0 && x.S_LOCK_STATE == "无").Count();
                            LogHelper.Info("AutoRun13TSJ" + $"od.S_ROW 出库余量判断是否需要转运。-{count}< 总共能用的货位数{loclistK} -7");
                            if (count <= loclistK - 7)
                            {
                                TrunStart = d;
                                break;
                                LogHelper.Info($"AutoRun13TSJ{od.SQL_WorkNo}对应工单的{od.S_ROW} 物料数量不足。触发转运。");
                                // 先看是否有到该库区的转运任务。 
                                var zxs = LocationHelper.GetList<YWLZXtake>(X => X.S_ZX_STATE == "执行" && X.S_END_AREA == od.S_ROW);

                                //1.查看物料是否匹配。
                                var itemTRUN = zxs.Any(x => x.S_ITEM_CODE == od.SQL_ItemCode && x.S_ITEM_NAME == od.SQL_ItemName && x.S_CJ_NAME == od.S_CJ_NAME);
                                if (itemTRUN)
                                {  //有到该库区的 物料转运任务了。 不需要继续了 。

                                    LogHelper.Info($"AutoRun13TSJ{od.SQL_WorkNo}已经存在转运了无需触发转运。");
                                    return;
                                }
                                //人工转运没指定物料，我会自动写回转运单 物料数据。

                                //找CD 区 哪里有这个物料。 
                                Dictitems TrunStart = new Dictitems();
                                foreach (var area in CDlist)
                                {
                                    //var ca = Expressionable.Create<Location, LocCntrRel, CntrItemRel>();

                                    //ca.And((o, p, t) => o.S_AREA_CODE == area && o.N_CURRENT_NUM > 0 && o.S_LOCK_STATE == "无" && t.S_ITEM_CODE == od.SQL_ItemCode && t.S_ITEM_NAME == od.SQL_ItemName && t.S_CJ_NAME == od.S_CJ_NAME);
                                    var lstCanOutL = newDb.Queryable<Location>().InnerJoin<LocCntrRel>((o, p) => o.S_LOC_CODE == p.S_LOC_CODE).InnerJoin<CntrItemRel>((o, p, t) => p.S_CNTR_CODE == t.S_CNTR_CODE).Where((o, p, t) => o.S_AREA_CODE == area && o.N_CURRENT_NUM > 0 && o.S_LOCK_STATE == "无" && t.S_ITEM_CODE == od.SQL_ItemCode && t.S_ITEM_NAME == od.SQL_ItemName && t.S_CJ_NAME == od.S_CJ_NAME).ToList();
                                    if (!lstCanOutL.Any())
                                    {
                                        lstCanOutL = newDb.Queryable<Location>().InnerJoin<LocCntrRel>((o, p) => o.S_LOC_CODE == p.S_LOC_CODE).InnerJoin<CntrItemRel>((o, p, t) => p.S_CNTR_CODE == t.S_CNTR_CODE).Where((o, p, t) => o.S_AREA_CODE == area && o.N_CURRENT_NUM > 0 && o.S_LOCK_STATE == "无" && t.S_ITEM_CODE == od.SQL_ItemCode && t.S_ITEM_NAME == od.SQL_ItemName).ToList();
                                    }
                                    List<string> CRk = new List<string>() { "出库锁", "入库锁" };
                                    var EndMum = newDb.Queryable<Location>().Where(l => l.S_AREA_CODE == area && CRk.Contains(l.S_LOCK_STATE)).ToList();
                                    var RowLock = EndMum.GroupBy(e => e.N_ROW).Select(f => f.First()).ToList();
                                    foreach (var item in RowLock)
                                    {
                                        lstCanOutL.RemoveAll(e => e.N_ROW == item.N_ROW);
                                    }
                                    if (lstCanOutL.Count() > 0)
                                    {
                                        var LstCan = newDb.Queryable<LocCntrRel>().Where(a => lstCanOutL.Select(e => e.S_LOC_CODE).ToList().Contains(a.S_LOC_CODE)).ToList();
                                        var loc = lstCanOutL.Find(e => e.S_LOC_CODE == LstCan.OrderBy(c => c.T_CREATE).FirstOrDefault().S_LOC_CODE);
                                        TrunStart.area = area;
                                        TrunStart.Row = loc.N_ROW;
                                    }
                                    //if (dsi.TryGetValue(area, out var dictitems1))
                                    //{

                                    //    var arearowsloc = LocationHelper.GetAreaNormalLocList(area);
                                    //    foreach (var d in dictitems1.FindAll(x => x.ItemCode == od.SQL_ItemCode && x.ItemName == od.SQL_ItemName && x.S_CJ_NAME == od.S_CJ_NAME))
                                    //    {
                                    //        if (arearowsloc.Exists(x => x.N_ROW == d.Row))
                                    //        {
                                    //            TrunStart = d;
                                    //            break;
                                    //        }
                                    //    }
                                    //}
                                }
                                LogHelper.Info($"ZdzyABArea{od.SQL_WorkNo}触发转运。转运来源是{JsonConvert.SerializeObject(TrunStart)}");
                                if (TrunStart?.area != null)
                                    WCSHelper.Do(db =>
                                    {
                                        db.Insertable(new YWLZXtake
                                        {
                                            S_START_AREA = TrunStart.area,
                                            N_START_ROW = TrunStart.Row,
                                            S_END_AREA = od.S_ROW,
                                            S_ZX_STATE = "执行",
                                            S_ITEM_CODE = od.SQL_ItemCode,
                                            S_ITEM_NAME = od.SQL_ItemName,
                                            S_CJ_NAME = od.S_CJ_NAME,
                                            S_ZZ_AREA = (od.S_ROW == "YWLAQWJ" ? "YWLWJJB" : od.S_ROW)
                                        }).ExecuteCommand();
                                    });

                            }
                        }
                    }
                }

                LogHelper.Info($"AutoRun13TSJ{od.SQL_WorkNo}触发转运。转运来源是{JsonConvert.SerializeObject(TrunStart)}");
                if (TrunStart != null)
                    WCSHelper.Do(db =>
                    {
                        db.Insertable(new YWLZXtake
                        {
                            S_START_AREA = TrunStart.area,
                            N_START_ROW = TrunStart.Row,
                            S_END_AREA = od.S_ROW,
                            S_ZX_STATE = "执行",
                            S_ITEM_CODE = od.SQL_ItemCode,
                            S_ITEM_NAME = od.SQL_ItemName,
                            S_CJ_NAME = od.S_CJ_NAME,
                            S_ZZ_AREA = (od.S_ROW == "YWLAQWJ" ? "YWLWJJB" : od.S_ROW)
                        }).ExecuteCommand();
                    });
            };

            //var TaskSiggg = Settings.GetTimeStamp();
            //var list = new List<string>() { "YWLAQWJ", "YWLBQWJ", "YWLCQSX", "YWLDQWJ" };
            //var WorkOrder = new List<YWLWorkOrder>();
            }
            catch (Exception ex)
            {

                LogHelper.Info($"ZdzyABArea 触发转运 报错:{ex.Message}");
            }
        }

        /// <summary>
        /// 原物料纸箱出库
        /// </summary>
        public static void AutoRun13TSJ()
        {
            //Action<YWLWorkOrder> _sAB没物料或者余量不足开始触发跟根据自动转运_名字越长越好 = (od) =>
            //{
            //    LogHelper.Info($"AutoRun13TSJ{od.SQL_WorkNo}对应工单的{od.S_ROW} 物料数量不足。触发转运。");
            //    // 先看是否有到该库区的转运任务。 
            //    var zxs = LocationHelper.GetList<YWLZXtake>(X => X.S_ZX_STATE == "执行" && X.S_END_AREA == od.S_ROW);
            //    //1.查看物料是否匹配。
            //    var itemTRUN = zxs.Any(x => x.S_ITEM_CODE == od.SQL_ItemCode && x.S_ITEM_NAME == od.SQL_ItemName && x.S_CJ_NAME == od.S_CJ_NAME);
            //    if (itemTRUN)
            //    {  //有到该库区的 物料转运任务了。 不需要继续了 。

            //        LogHelper.Info($"AutoRun13TSJ{od.SQL_WorkNo}已经存在转运了无需触发转运。");
            //        return;
            //    }
            //    //人工转运没指定物料，我会自动写回转运单 物料数据。

            //    //找CD 区 哪里有这个物料。 
            //    Dictitems TrunStart = null;
            //    foreach (var area in CDlist)
            //    {
            //        if (dsi.TryGetValue(area, out var dictitems1))
            //        {
            //            var arearowsloc = LocationHelper.GetAreaNormalLocList(area);
            //            foreach (var d in dictitems1.FindAll(x => x.ItemCode == od.SQL_ItemCode && x.ItemName == od.SQL_ItemName && x.S_CJ_NAME == od.S_CJ_NAME))
            //            {
            //                if (arearowsloc.Exists(x => x.N_ROW == d.Row))
            //                {
            //                    TrunStart = d;
            //                    break;
            //                }
            //            }
            //        }
            //    }

            //    LogHelper.Info($"AutoRun13TSJ{od.SQL_WorkNo}触发转运。转运来源是{JsonConvert.SerializeObject(TrunStart)}");
            //    if (TrunStart != null)
            //        WCSHelper.Do(db =>
            //        {
            //            db.Insertable(new YWLZXtake
            //            {
            //                S_START_AREA = TrunStart.area,
            //                N_START_ROW = TrunStart.Row,
            //                S_END_AREA = od.S_ROW,
            //                S_ZX_STATE = "执行",
            //                S_ITEM_CODE = od.SQL_ItemCode,
            //                S_ITEM_NAME = od.SQL_ItemName,
            //                S_CJ_NAME = od.S_CJ_NAME,
            //                S_ZZ_AREA = (od.S_ROW == "YWLAQWJ" ? "YWLWJJB" : od.S_ROW)
            //            }).ExecuteCommand();
            //        });
            //};
            foreach (var PLC in Settings.GetDeviceInfoList().FindAll(X => X.deviceType == 13 && X.enable == 1))
            {
                string pline = PLC.deviceName;
@@ -3669,34 +3872,6 @@
                    if (locs.Find(x => x.N_CURRENT_NUM > 0) != null) //拆垛有货 不判断
                        continue;
                    can = true;

                    //var source1 = orkOrd.FirstOrDefault();
                    //foreach (var item in list)
                    //{
                    //    YWLWorkOrder source = new YWLWorkOrder();
                    //    source.SQL_PLineNo = source1.SQL_PLineNo;
                    //    source.FuLe_PLine_No = source1.FuLe_PLine_No;
                    //    source.SQL_LinkLineNO = source1.SQL_LinkLineNO;
                    //    source.SQL_Area = item;
                    //    source.SQL_UsingNow = source1.SQL_UsingNow;
                    //    source.SQL_State = source1.SQL_State;
                    //    source.SQL_WorkNo = source1.SQL_WorkNo;
                    //    source.SQL_ItemCode = source1.SQL_ItemCode;
                    //    source.SQL_ItemName = source1.SQL_ItemName;
                    //    source.SQL_charge = source1.SQL_charge;
                    //    source.SQL_Total = source1.SQL_Total;
                    //    source.SQL_PLAN_END = source1.SQL_PLAN_END;
                    //    source.SQL_Modify_TIme = source1.SQL_Modify_TIme;
                    //    source.OutNum = source1.OutNum;
                    //    source.WorkType = source1.WorkType;
                    //    source.MidArea = source1.MidArea;
                    //    source.TagOver = source1.TagOver;
                    //    source.TagOverTime = source1.TagOverTime;
                    //    source.S_BQ_TRAY_TYPE = source1.S_BQ_TRAY_TYPE;
                    //    source.S_CJ_NAME = source1.S_CJ_NAME;
                    //    source.S_ROW = item;
                    //    WorkOrder.Add(source);
                    //}
                }

                orkOrd = orkOrd.FindAll(x => x.OutNum > 0 && DateTime.Now.Subtract(x.SQL_Modify_TIme ?? DateTime.Now).TotalSeconds > 10);
@@ -3707,18 +3882,21 @@
                    {
                        var l2 = new List<string>() { "YWLAQWJ", "YWLBQWJ" };//, "YWLCQSX", "YWLDQWJ" };
                        l2.Remove(od.S_ROW);
                        l2.Remove(od.TagOver);
                        var odsr = new List<string> { od.TagOver, od.S_ROW }.Concat(l2).Distinct().ToList();
                        //l2.Remove(od.TagOver);
                        //var odsr = new List<string> { od.TagOver, od.S_ROW }.Concat(l2).Distinct().ToList();
                        var odsr = new List<string> { od.S_ROW }.Concat(l2).Distinct().ToList();

                        ///汇总仓库里最大层是几层。
                        Dictitems Lart = null;
                        foreach (var area in odsr)//od.S_ROW.Split('$'))
                        {
                            if (string.IsNullOrEmpty(area)) continue;

                            if (string.IsNullOrEmpty(area))
                            {
                                continue;
                            }
                            if (dsi.TryGetValue(area, out var dictitems1))
                            {
                                foreach (var d in dictitems1.FindAll(x => x.ItemCode == od.SQL_ItemCode && x.ItemName == od.SQL_ItemName && x.S_CJ_NAME == od.S_CJ_NAME))
                                foreach (var d in dictitems1.FindAll(x => x.ItemCode == od.SQL_ItemCode && x.ItemName == od.SQL_ItemName))
                                {
                                    if (Lart == null)
                                        Lart = d;
@@ -3758,7 +3936,7 @@
                                        if (_clcntitem != null)
                                        {
                                            LogHelper.Info("AutoRun13TSJ" + "相互是否匹配 _clcntitem S_ITEM_CODE:" + _clcntitem.S_ITEM_CODE + " od" + od.SQL_ItemCode + " _clcntitem S_ITEM_NAME:" + _clcntitem.S_ITEM_NAME + "od: " + od.SQL_ItemName + " od.S_CJ_NAME:" + od.S_CJ_NAME + "结果:" + (_clcntitem.S_ITEM_CODE == od.SQL_ItemCode && _clcntitem.S_ITEM_NAME == od.SQL_ItemName && _clcntitem.S_CJ_NAME == od.S_CJ_NAME));
                                            if (_clcntitem.S_ITEM_CODE == od.SQL_ItemCode && _clcntitem.S_ITEM_NAME == od.SQL_ItemName && _clcntitem.S_CJ_NAME == od.S_CJ_NAME)
                                            if (_clcntitem.S_ITEM_CODE == od.SQL_ItemCode && _clcntitem.S_ITEM_NAME == od.SQL_ItemName)
                                            {
                                                StartBit = rl;
                                                break;
@@ -3779,15 +3957,18 @@
                                    //检测指定库区的物料排总数量
                                    if (dsi.TryGetValue(od.S_ROW, out var dictitems1))
                                    {
                                        var rows = dictitems1.Select(x => x.Row).Distinct();
                                        var loclist = LocationHelper.GetLocList(x => x.S_AREA_CODE == od.S_ROW && rows.Contains(x.N_ROW));
                                        var count = loclist.FindAll(x => x.N_CURRENT_NUM > 0 && x.S_LOCK_STATE == "无").Sum(x => x.N_CURRENT_NUM);
                                        LogHelper.Info("AutoRun13TSJ" + $"od.S_ROW 出库余量判断是否需要转运。-{count}< 5");
                                        if (count < 5)
                                        {
                                            autoTurn = true;
                                            _sAB没物料或者余量不足开始触发跟根据自动转运_名字越长越好(od);
                                        }
                                        //var rows = dictitems1.Select(x => x.Row).Distinct();
                                        //var loclist = LocationHelper.GetLocList(x => x.S_AREA_CODE == od.S_ROW && rows.Contains(x.N_ROW));
                                        ////查询可用货位有多少
                                        //List<string> Ky = new List<string>() { "无", "出库锁", "入库锁" };
                                        //var loclistK = loclist.FindAll(x => Ky.Contains(x.S_LOCK_STATE)).Count();
                                        //var count = loclist.FindAll(x => x.N_CURRENT_NUM > 0 && x.S_LOCK_STATE == "无").Sum(x => x.N_CURRENT_NUM);
                                        //LogHelper.Info("AutoRun13TSJ" + $"od.S_ROW 出库余量判断是否需要转运。-{count}< 总共能用的货位数{loclistK} -7");
                                        //if (count < loclistK - 7)
                                        //{
                                        //    autoTurn = true;
                                        //    _sAB没物料或者余量不足开始触发跟根据自动转运_名字越长越好(od);
                                        //}
                                    }
                                }
                                Location Endbit = null;
@@ -3831,10 +4012,17 @@
                                        b = TaskProcess.CreateTransport(od.SQL_WorkNo, StartBit.S_LOC_CODE, jbbit, "原物料搬运-纸箱", crs, StartBit.N_CURRENT_NUM - crs.Count + 1, 1, crs.Count, PLC.taskPri, "", Endbit.S_LOC_CODE);
                                    else
                                        b = TaskProcess.CreateTransport(od.SQL_WorkNo, StartBit.S_LOC_CODE, Endbit.S_LOC_CODE, "原物料搬运-纸箱", crs, StartBit.N_CURRENT_NUM - crs.Count + 1, 1, crs.Count, PLC.taskPri);

                                    if (b)
                                    {
                                        var r = new RowLock { S_LOCK_SRC = od.SQL_ItemCode, T_LOCK_TIME = DateTime.Now, S_LOCK_STATE = "出库锁", S_AREA_CODE = StartBit.S_AREA_CODE, N_ROW = StartBit.N_ROW };
                                        var db = new SqlHelper<object>().GetInstance();
                                        od.TagOverTime = DateTime.Now;
                                        od.TagOver = StartBit.S_AREA_CODE;
                                        var ggf = db.Updateable(od).UpdateColumns(it => new { it.TagOverTime, it.TagOver }).ExecuteCommand();
                                        LogHelper.Info($"上提升机任务 更新工单的时间影响行数: {ggf}");

                                        var r = new RowLock { S_LOCK_SRC = od.SQL_ItemCode, T_LOCK_TIME = DateTime.Now, S_LOCK_STATE = "出库锁", S_AREA_CODE = StartBit.S_AREA_CODE, N_ROW = StartBit.N_ROW };

                                        //给终点锁定住
                                        if (od.S_ROW == "YWLCQSX" || od.S_ROW == "YWLDQWJ")
                                        {
@@ -3855,9 +4043,7 @@
                                        //    }
                                        //}
                                        //else db.Insertable(r).ExecuteCommand();
                                        od.TagOverTime = DateTime.Now;
                                        od.TagOver = StartBit.S_AREA_CODE;
                                        db.Updateable(od).UpdateColumns(it => new { it.TagOverTime, it.TagOver }).ExecuteCommand();

                                        //break;
                                    }
                                }
@@ -3868,10 +4054,10 @@
                                }
                            }
                        }
                        else
                        {
                            _sAB没物料或者余量不足开始触发跟根据自动转运_名字越长越好(od);
                        }
                        //else
                        //{
                        //    _sAB没物料或者余量不足开始触发跟根据自动转运_名字越长越好(od);
                        //}
                    }
            }
        }
@@ -4036,10 +4222,23 @@
                var locS = LocationHelper.GetAreaNormalLocList(ODs.Key);
                foreach (var od in ODs)
                {
                    LogHelper.Info($"from{od.S_START_AREA} mid:{od.S_ZZ_AREA} to{od.S_END_AREA} 开始 》》》");
                    if (string.IsNullOrEmpty(od.S_ZZ_AREA) || string.IsNullOrEmpty(od.S_END_AREA))
                    if (od.S_END_AREA == "YWLBQWJ" || od.S_END_AREA == "YWLAQWJ")//到B区的移库工单最多只能生成两条任务
                    {
                        LogHelper.CError($"from{od.S_START_AREA} mid:{od.S_ZZ_AREA} to{od.S_END_AREA} 数据缺失。无法完成移库。");

                        //查询任务数 
                        List<string> AreaLi = new List<string>() { "YWLBQWJ", "YWLWJJB" };
                        var db = new SqlHelper<object>().GetInstance();
                        var list = db.Queryable<Location>().Where(a => AreaLi.Contains(a.S_AREA_CODE) && a.S_LOCK_STATE == "入库锁").ToList();
                        if (list.Count() >= 2)
                        {
                            LogHelper.Info($"CreateTransport-  CreateTask Error" + $"终点库区为YWLRGDD或者YWLWJJB 则最多只能生成两个任务");
                            continue;
                        }
                    }
                    LogHelper.Info($"YWL_ZX_Turn from{od.S_START_AREA} mid:{od.S_ZZ_AREA} to{od.S_END_AREA} 开始 》》》");
                    if (string.IsNullOrEmpty(od.S_ZZ_AREA) && string.IsNullOrEmpty(od.S_END_AREA))
                    {
                        LogHelper.CError($"YWL_ZX_Turn from{od.S_START_AREA} to{od.S_END_AREA} 数据缺失。无法完成移库。");
                        continue;
                    }
                    var rows = locS.FindAll(x => x.N_ROW == od.N_START_ROW);
@@ -4056,13 +4255,23 @@
                            var lastful = rows.FindAll(x => x.N_CURRENT_NUM > 0).OrderBy(x => x.N_COL).LastOrDefault();
                            if (lastful != null)
                            {
                                LogHelper.Info($"from{od.S_START_AREA} mid:{od.S_ZZ_AREA} to{od.S_END_AREA} 找到移库起点》{lastful.S_LOC_CODE}。");
                                LogHelper.Info($"YWL_ZX_Turn from{od.S_START_AREA}to{od.S_END_AREA} 找到移库起点》{lastful.S_LOC_CODE}。");
                                var crs = LocationHelper.GetLocCntrRel(lastful.S_LOC_CODE);
                                var cntritems = ContainerHelper.GetCntrItemRel(crs.FirstOrDefault()?.S_CNTR_CODE);
                                if (!cntritems.Any())
                                    continue;
                                LogHelper.Info($"from{od.S_START_AREA} mid:{od.S_ZZ_AREA} to{od.S_END_AREA} 找到移库起点》{lastful.S_LOC_CODE}。接驳是否被锁？：{InworkLock}");
                                LogHelper.Info($"YWL_ZX_Turn from{od.S_START_AREA}to{od.S_END_AREA} 找到移库起点》{lastful.S_LOC_CODE}。接驳是否被锁？：{InworkLock}");
                                var cir1 = cntritems.First();

                                if (!string.IsNullOrEmpty(od.S_ITEM_CODE))
                                {
                                    ///给移库单 写上转运的物料数据。
                                    od.S_ITEM_CODE = cir1.S_ITEM_CODE;
                                    od.S_ITEM_NAME = cir1.S_ITEM_NAME;
                                    od.S_CJ_NAME = cir1.S_CJ_NAME;
                                    WCSHelper.Do(db => db.Updateable(od).UpdateColumns(it => new { it.S_ITEM_NAME, it.S_ITEM_CODE, it.S_CJ_NAME }).ExecuteCommand());
                                }

                                if (od.S_ZZ_AREA == "YWLWJJB")
                                {
                                    if (InworkLock)
@@ -4092,24 +4301,16 @@
                                        Endbit = zzrloclist.Find(x => x.N_COL > (_cl2?.N_COL ?? 0));
                                    if (Endbit != null)
                                    {
                                        LogHelper.Info($"入中转区{od.S_ZZ_AREA}使用{Endbit.S_LOC_CODE}");
                                        LogHelper.Info($"入中转区{nextarea}使用{Endbit.S_LOC_CODE}");
                                        break;
                                    }
                                }
                                LogHelper.Info($"from{od.S_START_AREA} mid:{od.S_ZZ_AREA} to{od.S_END_AREA} 找到移库终点》{Endbit?.S_LOC_CODE}");
                                LogHelper.Info($"YWL_ZX_Turn from{od.S_START_AREA} mid:{od.S_ZZ_AREA} to{od.S_END_AREA} 找到移库终点》{Endbit?.S_LOC_CODE}");
                                if (Endbit != null)
                                {
                                    //生成接驳区任务，标记为终点库区。
                                    var b = TaskProcess.CreateTransport(od.S_ID, lastful.S_LOC_CODE, Endbit.S_LOC_CODE, "原物料搬运-纸箱", crs.Select(x => x.S_CNTR_CODE).ToList(), 1, 1, crs.Count, 50, nextarea == od.S_END_AREA ? "" : od.S_END_AREA);
                                    if (od.S_ZZ_AREA == "YWLWJJB") InworkLock = false;
                                    if (!string.IsNullOrEmpty(od.S_ITEM_CODE))
                                    {
                                        ///给移库单 写上转运的物料数据。
                                        od.S_ITEM_CODE = cir1.S_ITEM_CODE;
                                        od.S_ITEM_NAME = cir1.S_ITEM_NAME;
                                        od.S_CJ_NAME = cir1.S_CJ_NAME;
                                        WCSHelper.Do(db => db.Updateable(od).UpdateColumns(it => new { it.S_ITEM_NAME, it.S_ITEM_CODE, it.S_CJ_NAME }).ExecuteCommand());
                                    }
                                    break;
                                }
                                else if (od.S_ZZ_AREA == "YWLWJJB") InworkLock = false;