111

cjs

2025-07-03 0fc71730109bb5904ded8e1a14c945e45b289c50

 ams/Hanhe.iWCS.JingmenGEMTwoProtocol/PLCControl.cs

@@ -3993,8 +3993,8 @@
                    {
                        CMMLog.Info("DGInWarehouse:" + JsonConvert.SerializeObject(locInfo));
                        string wmstaskno = "";
                        string trayCode = "";
                        bool req = WMSHelper.WMSIn(locCode, "电钴打包下线", ref wmstaskno, ref trayCode, "", "CKHJ");
                        string trayCode = locInfo.trayCode;
                        bool req = WMSHelper.WMSIn(locCode, "电钴打包下线", ref wmstaskno, ref trayCode, "", "DGCK");
                        if (req)
                        {
                            CMMLog.Info($"电钴接驳位入立库流程：WMS生成任务成功！");
@@ -4727,59 +4727,72 @@
                        host = plc.ip,
                        port = plc.port
                    });
                    CMMLog.Debug($"包装机满托下线：读取通道号为：{plc.readAddr},ip:{plc.ip},端口：{plc.port}");
                    CMMLog.Debug($"包装机满托下线值为：{result.result[0]}");
                    if (result != null && result.errCode == 0)
                    {
                        if (result.result[0] == 1)
                        {
                            //成品下线任务生成到接驳平台
                            string traycode = DateTime.Now.ToString("yyyy-MM-dd").Replace("-", "");
                            //可生成任务
                            var CBInfo = Settings.GetDGConnectingbitsList().Where(a => a.enable == 1).ToList();
                            if (CBInfo != null)
                            string traycode = "";
                            var DGinfoList = MongoDBSingleton.Instance.FindAll<DGPackingLineFullModel>("DGPackingLineFullModel");
                            if (DGinfoList.Count > 0)
                            {
                                //string timeStamp = timecuo.data.First().timeStamp.ToString();
                                string timeStamp = "";
                                foreach (var a in CBInfo)
                                var DGinfo = DGinfoList.Where(a => a.isUse == "0").OrderBy(a => a.createTime).First();
                                //将数据插入中间表
                                traycode = DGinfo.trayCode;
                            }
                            //可生成任务
                            CMMLog.Debug($"包装机满托下线:获取托盘号：{traycode}");
                            if (!string.IsNullOrEmpty(traycode))
                            {
                                var CBInfo = Settings.GetDGConnectingbitsList().Where(a => a.enable == 1).ToList();
                                if (CBInfo != null)
                                {
                                    if (!string.IsNullOrEmpty(a.locCode))
                                    foreach (var a in CBInfo)
                                    {
                                        //在中间表中查找点位
                                        var CBTable = MongoDBSingleton.Instance.FindOne<DGConnectingBits>(Query.EQ("Bit", a.locCode), "DGConnectingBits");
                                        if (CBTable != null)
                                        if (!string.IsNullOrEmpty(a.locCode))
                                        {
                                            if (string.IsNullOrEmpty(CBTable.trayCode))
                                            //在中间表中查找点位
                                            var CBTable = MongoDBSingleton.Instance.FindOne<DGConnectingBits>(Query.EQ("Bit", a.locCode), "DGConnectingBits");
                                            if (CBTable != null)
                                            {
                                                if (string.IsNullOrEmpty(CBTable.trayCode))
                                                {
                                                    //生成任务，并且将点位写入中间表
                                                    var amsResult = AMSHelper.CreateTask(DateTime.Now.Ticks.ToString(), plc.location, a.locCode, "包装机满托下线", 0, traycode);
                                                    if (amsResult.success)
                                                    {
                                                        CMMLog.Debug($"包装机满托下线：AMS调用API成功！");
                                                        MongoDBSingleton.Instance.Update<DGConnectingBits>(Query.EQ("Bit", a.locCode), Update.Set("trayCode", traycode), UpdateFlags.None);
                                                        MongoDBSingleton.Instance.Update<DGPackingLineFullModel>(Query.EQ("trayCode", traycode), Update.Set("isUse", "1"), UpdateFlags.None);
                                                        break;
                                                    }
                                                    else CMMLog.Debug($"包装机满托下线：AMS调用API失败，开始重新调用！");
                                                }
                                            }
                                            else
                                            {
                                                //生成任务，并且将点位写入中间表
                                                var amsResult = AMSHelper.CreateTask(DateTime.Now.Ticks.ToString(), plc.location, a.locCode, "包装机满托下线", 0, traycode);
                                                if (amsResult.success)
                                                {
                                                    CMMLog.Debug($"包装机满托下线：AMS调用API成功！");
                                                    MongoDBSingleton.Instance.Update<DGConnectingBits>(Query.EQ("Bit", a.locCode), Update.Set("trayCode", traycode).Set("timeCuo", timeStamp), UpdateFlags.None);
                                                    //打包下线任务生成成功，向中间表插入数据

                                                    MongoDBSingleton.Instance.Insert<DGConnectingBits>(new DGConnectingBits { Bit = a.locCode, trayCode = traycode, state = "0" });
                                                    MongoDBSingleton.Instance.Update<DGPackingLineFullModel>(Query.EQ("trayCode", traycode), Update.Set("isUse", "1"), UpdateFlags.None);
                                                    break;
                                                }
                                                else CMMLog.Debug($"包装机满托下线：AMS调用API失败，开始重新调用！");
                                            }
                                        }
                                        else
                                        {
                                            //生成任务，并且将点位写入中间表
                                            var amsResult = AMSHelper.CreateTask(DateTime.Now.Ticks.ToString(), plc.location, a.locCode, "包装机满托下线", 0, traycode);
                                            if (amsResult.success)
                                            {
                                                CMMLog.Debug($"包装机满托下线：AMS调用API成功！");
                                                //打包下线任务生成成功，向中间表插入数据

                                                MongoDBSingleton.Instance.Insert<DGConnectingBits>(new DGConnectingBits { Bit = a.locCode, trayCode = traycode, state = "0", timeCuo = timeStamp });
                                                break;
                                            }
                                            else CMMLog.Debug($"包装机满托下线：AMS调用API失败，开始重新调用！");
                                        }
                                        else CMMLog.Debug("打包下线口接驳位点位未配置");
                                    }
                                    else CMMLog.Debug("打包下线口接驳位点位未配置");
                                }
                                else CMMLog.Debug("打包下线口接驳位未配置");
                            }
                            else CMMLog.Debug("打包下线口接驳位未配置");
                            
                        }
                    }
                }
@@ -4846,15 +4859,19 @@
            /// <summary>
            /// 物料编码
            /// </summary>
            public string CN_S_MATERI_CODE { get; set; }
            public string CN_S_ITEM_CODE { get; set; }
            /// <summary>
            /// 桶重量（单个桶重量*桶数量）
            /// 桶重量
            /// </summary>
            public int CN_N_WEIGHT { get; set; }
            public float CN_F_QUANTITY { get; set; }
            /// <summary>
            /// 桶数量
            /// </summary>
            public int CN_N_CONUT { get; set; }
            /// <summary>
            /// 生产日期
            /// </summary>
            public string CN_S_Data { get; set; }
            public string CN_T_PRODUCTION_S { get; set; }

            public int CN_S_EXT8 { get; set; }
        }