合肥佳通优化

lss

2025-06-04 c4bcf24d506bdcd2e2b78bca63f0fbf08c356a86

 HH.WCS.Mobox3/HH.WCS.Mobox3.JiaTong/api/ApiHelper.cs

@@ -273,7 +273,7 @@
                            LogHelper.Info("创建任务：" + JsonConvert.SerializeObject(wcsTask), "CreateTask");
                            if (WCSHelper.CreateTask(wcsTask))
                            {
                                LocationHelper.LockLoc(Start, 2);
                                LocationHelper.LockLoc(End, 2);

                                LogHelper.Info("创建任务成功");
                            }
@@ -281,61 +281,65 @@
                        else if (startArea.N_FLOOR != endArea.N_FLOOR)
                        {
                            //楼层电梯分配
                            var endloc1 = Settings.elevatorLoc.Find(a => a.Floor == startArea.N_FLOOR);
                            var startloc1 = Settings.elevatorLoc.Find(a => a.Floor == endArea.N_FLOOR);
                            var elevatorLoc = LocationHelper.GetElevatorLoc();

                            //创建wcs分段任务
                            var wcsTask = new WCSTask
                            {
                                S_CODE = WCSHelper.GenerateTaskNo(),
                                S_TYPE = "电梯1",
                                S_EQ_NO = taskData.taskNum,
                                S_START_LOC = Start,
                                S_END_LOC = endloc1.Location[0],
                                N_CNTR_COUNT = 1,
                                S_START_WH = startloc.S_WH_CODE,
                                S_START_AREA = startloc.S_AREA_CODE,
                                S_END_WH = endloc.S_WH_CODE,
                                S_END_AREA = endloc.S_AREA_CODE,
                                N_SCHEDULE_TYPE = 1,
                                S_CNTR_CODE = CntrCode,
                                N_PRIORITY = taskData.priority,
                                N_START_LAYER = 1,
                                N_END_LAYER = 1,
                                S_WMS_NO = taskData.wmsTaskNo,
                                Z_TYPE = n_type,
                                S_MES_NO = taskData.mesTaskNo
                            };
                            var wcsTask1 = new WCSTask
                            {
                                S_CODE = WCSHelper.GenerateTaskNo(),
                                S_TYPE = "电梯2",
                                S_EQ_NO = taskData.taskNum,
                                S_START_LOC = startloc1.Location[0],
                                S_END_LOC = End,
                                N_CNTR_COUNT = 1,
                                S_START_WH = startloc.S_WH_CODE,
                                S_START_AREA = startloc.S_AREA_CODE,
                                S_END_WH = endloc.S_WH_CODE,
                                S_END_AREA = endloc.S_AREA_CODE,
                                N_SCHEDULE_TYPE = 1,
                                S_CNTR_CODE = CntrCode,
                                N_PRIORITY = taskData.priority,
                                S_WMS_NO = taskData.wmsTaskNo,
                                N_START_LAYER = 1,
                                N_END_LAYER = 1,
                                Z_TYPE = n_type,
                                S_MES_NO = taskData.mesTaskNo
                            if (elevatorLoc != null)
                            {  //创建wcs分段任务
                                var wcsTask = new WCSTask
                                {
                                    S_CODE = WCSHelper.GenerateTaskNo(),
                                    S_TYPE = "电梯1",
                                    S_EQ_NO = taskData.taskNum,
                                    S_START_LOC = Start,
                                    S_END_LOC = elevatorLoc.S_CODE,
                                    N_CNTR_COUNT = 1,
                                    S_START_WH = startloc.S_WH_CODE,
                                    S_START_AREA = startloc.S_AREA_CODE,
                                    S_END_WH = elevatorLoc.S_WH_CODE,
                                    S_END_AREA = elevatorLoc.S_AREA_CODE,
                                    N_SCHEDULE_TYPE = 1,
                                    S_CNTR_CODE = CntrCode,
                                    N_PRIORITY = taskData.priority,
                                    N_START_LAYER = 1,
                                    N_END_LAYER = 1,
                                    S_WMS_NO = taskData.wmsTaskNo,
                                    Z_TYPE = n_type,
                                    S_MES_NO = taskData.mesTaskNo
                                };
                                var wcsTask1 = new WCSTask
                                {
                                    S_CODE = WCSHelper.GenerateTaskNo(),
                                    S_TYPE = "电梯2",
                                    S_EQ_NO = taskData.taskNum,
                                    S_START_LOC = elevatorLoc.S_CODE,
                                    S_END_LOC = End,
                                    N_CNTR_COUNT = 1,
                                    S_START_WH = elevatorLoc.S_WH_CODE,
                                    S_START_AREA = elevatorLoc.S_AREA_CODE,
                                    S_END_WH = endloc.S_WH_CODE,
                                    S_END_AREA = endloc.S_AREA_CODE,
                                    N_SCHEDULE_TYPE = 1,
                                    S_CNTR_CODE = CntrCode,
                                    N_PRIORITY = taskData.priority,
                                    S_WMS_NO = taskData.wmsTaskNo,
                                    N_START_LAYER = 1,
                                    N_END_LAYER = 1,
                                    Z_TYPE = n_type,
                                    S_MES_NO = taskData.mesTaskNo

                            };
                                };
                                LogHelper.Info("创建任务：" + JsonConvert.SerializeObject(wcsTask), "CreateTask");
                                if (WCSHelper.CreateTask(wcsTask) && WCSHelper.CreateTask(wcsTask1))
                                {

                            LogHelper.Info("创建任务：" + JsonConvert.SerializeObject(wcsTask), "CreateTask");
                            if (WCSHelper.CreateTask(wcsTask) && WCSHelper.CreateTask(wcsTask1))
                            {

                                LocationHelper.LockLoc(endloc.S_CODE, 1);
                                LogHelper.Info("创建任务成功");
                                    // LocationHelper.LockLoc(Start, 1);
                                    LocationHelper.LockLoc(End, 2);
                                    LogHelper.Info("创建任务成功");
                                }
                            }



                        }
                    }
                    else
@@ -347,6 +351,7 @@
                }
                else if (taskData.taskType == 5)//移库流程，直接使用起点货位和终点货位生成任务，并绑定托盘
                {
                    note = "出库";
                    //创建托盘物料绑定信息，并计算终点货位
                    if (CreateCntrIteminfo(partData, taskData))
                    {
@@ -740,6 +745,18 @@
            string areacode = "";
            try
            {

                #region 入库检查托盘物料表有无数据
                var cntritem = db.Queryable<CntrItemDetail>().Where(a => a.S_CNTR_CODE.Trim() == model.Rfid).First();
                if (cntritem == null)
                {
                    result.code = "1";
                    result.msg = $"创建任务失败，托盘:{model.Rfid}无绑定物料数据";
                    LogHelper.Info($"ItemBack：{result.msg}");
                    AddErrorInfo("托盘绑定物料数据为空", result.msg, Source);
                    return result;
                }
                #endregion

                #region 判断托盘绑定货位是否和下发绑定起点相同,如果没绑定托盘则绑定托盘
                var CntrLoc = db.Queryable<LocCntrRel>().Where(a => a.S_CNTR_CODE.Trim() == model.Rfid).First();
@@ -1195,7 +1212,7 @@
                        var whcode = Settings.wareLoc.Where(a => a.AreaCode == startloc.S_WH_CODE).FirstOrDefault();
                        if (whcode != null)
                        {
                            if (startloc.S_NOTE == "PM" || string.IsNullOrEmpty(startloc.S_NOTE))
                            if ( string.IsNullOrEmpty(startloc.S_NOTE))
                            {
                                areacode = whcode.PMK;
                            }
@@ -1415,7 +1432,7 @@
                        Z_TYPE = 5

                    };
                    LogHelper.Info("创建出平库任务：" + JsonConvert.SerializeObject(wcsTask));
                    LogHelper.Info("创建呼叫空托任务：" + JsonConvert.SerializeObject(wcsTask));
                    if (WCSHelper.CreateTask(wcsTask))
                    {
                        LocationHelper.LockLoc(Start, 2);
@@ -1476,8 +1493,6 @@

            try
            {


                #region 余料返回根据托盘找出库任务
                //余料返回根据托盘找出库任务
                //msts = WCSHelper.GetTaskBycntrcode(model.Rfid);
@@ -1515,10 +1530,11 @@
                    if (whcode != null)
                    {
                        //粉料直接回库，其他物料需要去对应的暂存区
                        #region 根据物料判断回库库区
                        if (model.PartNumber.StartsWith("4X"))
                        {
                            areacode = whcode.PMK;
                            loc = StorageCompute(itemcode, areacode);
                            //loc = StorageCompute(itemcode, areacode);
                            //if (loc == null)
                            //{
                            //    loc = emptyRow(areacode);
@@ -1564,49 +1580,41 @@
                                AddErrorInfo("物料编码格式错误", result.msg, Source);
                                return result;
                            }
                            var EndLocs = db.Queryable<Location>().Where(a => a.S_AREA_CODE.Trim() == areacode).ToList();
                            if (EndLocs.Count > 0)
                            {
                                //loc =  EndLocs.Find(a => a.N_CURRENT_NUM == 0 && a.N_LOCK_STATE == 0);
                                loc = FindEndcolByLocList(EndLocs);
                                if (loc != null)
                                {
                                    End = loc.S_CODE;
                                }
                                else
                                {
                                    result.code = "1";
                                    result.msg = $"终点库区：{areacode}无可用货位";
                                    AddErrorInfo("查找库区失败", result.msg, Source);
                                    return result;
                                }

                            }
                            else
                            {
                                result.code = "1";
                                result.msg = $"根据终点库区：{areacode},未找到对应货位";
                                AddErrorInfo("查找库区失败", result.msg, Source);
                                return result;
                            }
                            //loc = StorageCompute(itemcode, areacode);
                            //if (loc == null)
                            //{
                            //    loc = emptyRow(areacode);
                            //}

                        }
                        #endregion


                        var EndLocs = db.Queryable<Location>().Where(a => a.S_AREA_CODE.Trim() == areacode).ToList();
                        //查找货位库区
                        if (EndLocs.Count > 0)
                        {
                            //loc =  EndLocs.Find(a => a.N_CURRENT_NUM == 0 && a.N_LOCK_STATE == 0);
                            loc = FindEndcolByLocList(EndLocs);


                        }
                        else
                        {
                            result.code = "1";
                            result.msg = $"根据终点库区：{areacode},未找到对应货位";
                            AddErrorInfo("查找库区失败", result.msg, Source);
                            return result;
                        }

                        if (loc != null)
                        {
                            End = loc.S_CODE;
                        }
                        else
                        {

                            result.code = "1";
                            result.msg = $"库区:{areacode}无可用货位";
                            AddErrorInfo("查找货位失败", result.msg, Source);
                            return result;
                        }

                    }
                    else
                    {
@@ -1968,18 +1976,19 @@
                    // var startArea = db.Queryable<Area>().Where(a => a.S_CODE.Trim() == startloc.S_AREA_CODE).First();
                    //var endArea = db.Queryable<Area>().Where(a => a.S_CODE.Trim() == endloc.S_AREA_CODE).First();

                    string dtcode = "DT-01";
                    //楼层电梯分配
                    var Diantiloc = db.Queryable<Location>().Where(a => a.S_CODE.Trim() == dtcode).First();
                    if (Diantiloc == null)
                    {
                        result.code = "1";
                        result.msg = $"创建任务失败，根据货位编码:{dtcode}未找到电梯货位";
                        AddErrorInfo("查找货位失败", result.msg, Source);
                        return result;
                    }
                    //string dtcode = "DT-01";
                    ////楼层电梯分配
                    //var Diantiloc = db.Queryable<Location>().Where(a => a.S_CODE.Trim() == dtcode).First();
                    //if (Diantiloc == null)
                    //{
                    //    result.code = "1";
                    //    result.msg = $"创建任务失败，根据货位编码:{dtcode}未找到电梯货位";
                    //    AddErrorInfo("查找货位失败", result.msg, Source);
                    //    return result;
                    //}

                    //根据电梯数量判断送往哪个电梯 （具体电梯流程根据现场电梯数量）
                    //根据任务数量判断送往哪个电梯 （具体电梯流程根据现场电梯数量）
                    var elevatorLoc = LocationHelper.GetElevatorLoc();

                    //创建wcs分段任务
                    var wcsTask = new WCSTask
@@ -1989,12 +1998,12 @@
                        S_TYPE = "电梯1",
                        S_EQ_NO = model.Data.task_no,
                        S_START_LOC = startloc.S_CODE,
                        S_END_LOC = Diantiloc.S_CODE,
                        S_END_LOC = elevatorLoc.S_CODE,
                        N_CNTR_COUNT = 1,
                        S_START_WH = startloc.S_WH_CODE,
                        S_START_AREA = startloc.S_AREA_CODE,
                        S_END_WH = endloc.S_WH_CODE,
                        S_END_AREA = endloc.S_AREA_CODE,
                        S_END_WH = elevatorLoc.S_WH_CODE,
                        S_END_AREA = elevatorLoc.S_AREA_CODE,
                        N_SCHEDULE_TYPE = 1,
                        S_CNTR_CODE = cntr.S_CNTR_CODE,
                        N_END_LAYER = 1,
@@ -2005,11 +2014,11 @@
                        S_CODE = WCSHelper.GenerateTaskNo(),
                        S_TYPE = "电梯2",
                        S_EQ_NO = model.Data.task_no,
                        S_START_LOC = Diantiloc.S_CODE,
                        S_START_LOC = elevatorLoc.S_CODE,
                        S_END_LOC = endloc.S_CODE,
                        N_CNTR_COUNT = 1,
                        S_START_WH = startloc.S_WH_CODE,
                        S_START_AREA = startloc.S_AREA_CODE,
                        S_START_WH = elevatorLoc.S_WH_CODE,
                        S_START_AREA = elevatorLoc.S_AREA_CODE,
                        S_END_WH = endloc.S_WH_CODE,
                        S_END_AREA = endloc.S_AREA_CODE,
                        N_SCHEDULE_TYPE = 1,
@@ -2117,7 +2126,6 @@
            return result;
        }


        /// <summary>
        /// 库位清空
        /// </summary>
@@ -2153,7 +2161,18 @@

                            LocationHelper.UnBindingLoc(loc, new List<string>() { cntrcode });
                            // db.Deleteable<LocCntrRel>().Where(it => it.S_LOC_CODE.Trim() == loc).ExecuteCommand();
                            db.Deleteable<CntrItemDetail>().Where(it => it.S_CNTR_CODE.Trim() == cntrcode).ExecuteCommand();
                            if (db.Deleteable<CntrItemDetail>().Where(it => it.S_CNTR_CODE == cntrcode).ExecuteCommand() > 0)
                            {
                                LogHelper.Info($"ClearLoc 库位清除成功");
                            }
                            else
                            {
                                LogHelper.Info($"ClearLoc 库位清除失败");
                                result.code = "1";
                                result.msg = "库位清除失败";
                                AddErrorInfo("库位清除失败", result.msg, Source);
                                return result;
                            }

                        }
                        else
@@ -2211,8 +2230,8 @@
            {
                device.AgvQty = agvDeviceInfo.Count;
                device.AgvErrorQty = agvDeviceInfo.FindAll(a => a.agvErrCode != "0" || a.agvErrCode != "0" || a.faildCode != "0").Count;
                device.AgvChargeQty = agvDeviceInfo.FindAll(a =>  a.agvErrCode == "1").Count;
                device.AgvRunQty = agvDeviceInfo.FindAll(a =>  a.agvErrCode == "1").Count;
                device.AgvChargeQty = agvDeviceInfo.FindAll(a => a.agvErrCode == "1").Count;
                device.AgvRunQty = agvDeviceInfo.FindAll(a => a.agvErrCode == "1").Count;
                foreach (var agv in agvDeviceInfo)
                {
                    string agvErrorInfo = GetAgvAlarmSendCodeTwo(agv.agvErrCode, agv.errCode2, agv.faildCode);
@@ -2546,7 +2565,7 @@
                        Location other = null;
                        //当前排没有锁并且有空位置
                        //先找满位，然后后面一层要么是空，要么不存在
                        other = rowList.OrderByDescending(a => a.N_COL).Where(a => a.N_CURRENT_NUM == 0).FirstOrDefault();
                        other = rowList.OrderBy(a => a.N_COL).Where(a => a.N_CURRENT_NUM == 0).FirstOrDefault();
                        //if (full == null)
                        //{
                        //    //没有满位，那就找最小的空位