完善ERP下发信息的处理和出库单生成流程

kazelee

2025-06-10 570a2d760cc1f2b78922d91d941ef81f01199e4c

 core/Monitor.cs

@@ -66,20 +66,34 @@
                        S_CNTR_CODE = cntrCode,
                    };

                    // BEG 每次轮询都检查对应容器是否已登记，登记则更新，未登记则插入
                    var cntrItemRel = db.Queryable<TN_Container_Item>()
                        .Where(i => i.S_CNTR_CODE == cntrCode).First();
                    var needInsertContainer = false;
                    var needUpdateContainer = false;
                    // 查容器信息表是否已经有这个容器
                    var cntr = db.Queryable<TN_Container>()
                        .Where(c => c.S_CODE == cntrCode).First();
                    // 如果找不到该容器，需要添加，并且将容器来源设置为任务名称
                    if (cntr == null) {
                        needInsertContainer = true;
                        LogHelper.Info($"轮询：{taskName}：容器：{cntrCode}，在容器表中没有登记，登记并设置容器来源为：{taskName}");

                    var insertTable = cntrItemRel == null;

                    if (insertTable) {
                        // 暂定在满托下线入库的时候，登记托盘容器-物料号关系（后面可能会改成系统维护）
                        cntrItemRel = new TN_Container_Item {
                            S_ITEM_CODE = itemCode,
                            S_CNTR_CODE = cntrCode,
                        cntr = new TN_Container {
                            S_CODE = cntrCode,
                            S_TYPE = "托盘",
                            S_SPEC = itemCode,
                            S_SOURCE = taskName,
                        };
                    }
                    // END
                    else {
                        // 如果找到该容器，但容器物料类型与下线物料不符，记录并直接覆盖（待定）
                        if (!string.IsNullOrEmpty(cntr.S_SPEC) && cntr.S_SPEC != itemCode) {
                            needUpdateContainer = true;
                            LogHelper.Info($"轮询：{taskName}：容器表中容器{cntrCode}对应的物料信息：{cntr.S_SPEC}，" +
                                $"与所需要的物料信息{itemCode}不符，直接覆盖结果");

                            cntr.S_SPEC = itemCode;
                            cntr.S_SOURCE = taskName;
                        }
                    }

                    var startLoc = db.Queryable<TN_Location>()
                        .Where(l => l.S_CODE == startLocCode) // 指定：起点货位号
@@ -101,13 +115,6 @@
                        S_CNTR_TYPE = "托盘",
                    };

                    //if (db.Insertable<TN_Loc_Container>(locCntrRel).ExecuteCommand() <= 0) {
                    //    info = $"插入货位容器关系失败：" + JsonConvert.SerializeObject(locCntrRel);
                    //    LogHelper.Info(info);
                    //    continue;
                    //    //return;
                    //}

                    var endLoc = db.Queryable<TN_Location>()
                        .Where(a => Settings.AreaMap[AreaName.K空托存放区].Contains(a.S_AREA_CODE))
                        .Where(a => a.N_LOCK_STATE == 0 && a.S_LOCK_STATE == "无" && a.C_ENABLE == "Y") // 筛选：未上锁
@@ -124,35 +131,33 @@
                    var cntId = locCntrRel.S_CNTR_CODE;
                    var task = WCSHelper.BuildTask(startLoc, endLoc, cntId, taskName);

                    LocationHelper.LockLoc(ref startLoc, 2); // 起点出库锁
                    LocationHelper.LockLoc(ref endLoc, 1); // 终点入库锁
                    LocationHelper.LockStartLoc(ref startLoc); // 起点出库锁
                    LocationHelper.LockEndLoc(ref endLoc); // 终点入库锁

                    using (var tran = db.Ado.UseTran()) {
                        if (needInsertContainer) {
                            if (db.Insertable<TN_Container>(cntr).ExecuteCommand() <= 0) {
                                info = $"插入容器表失败：" + JsonConvert.SerializeObject(cntr);
                                tran.RollbackTran();
                                LogHelper.Info(info);
                                continue;
                            }
                        }
                        else if (needUpdateContainer) {
                            if (db.Updateable<TN_Container>(cntr).ExecuteCommand() <= 0) {
                                info = $"更新容器表失败：" + JsonConvert.SerializeObject(cntr);
                                tran.RollbackTran();
                                LogHelper.Info(info);
                                continue;
                            }
                        }

                        if (db.Insertable<TN_CG_Detail>(cgDetail).ExecuteCommand() <= 0) {
                            tran.RollbackTran();
                            info = $"插入容器货品信息表失败：物料编码{cgDetail.S_ITEM_CODE}，容器编码{cgDetail.S_CNTR_CODE}";
                            LogHelper.Info(info);
                            continue;
                        }

                        // BEG 插入或更新容器与物料类型的绑定表
                        if (insertTable) {
                            if (db.Insertable<TN_Container_Item>(cntrItemRel).ExecuteCommand() <= 0) {
                                tran.RollbackTran();
                                info = $"登记容器物料类型绑定表失败：物料编码{cntrItemRel.S_ITEM_CODE}，容器编码{cntrItemRel.S_CNTR_CODE}";
                                LogHelper.Info(info);
                                continue;
                            }
                        }
                        else {
                            if (db.Updateable<TN_Container_Item>(cntrItemRel).ExecuteCommand() <= 0) {
                                tran.RollbackTran();
                                info = $"登记容器物料类型绑定表失败：物料编码{cntrItemRel.S_ITEM_CODE}，容器编码{cntrItemRel.S_CNTR_CODE}";
                                LogHelper.Info(info);
                                continue;
                            }
                        }
                        // END

                        if (db.Insertable<TN_Loc_Container>(locCntrRel).ExecuteCommand() <= 0) {
                            tran.RollbackTran();
@@ -207,9 +212,10 @@
        }

        public static void CheckOutboundOrder() {
            var taskName = TaskName.C成品胶出库;
            var db = new SqlHelper<object>().GetInstance();
            var info = $"轮询--{taskName}--";
            var info = "";

            var taskName = TaskName.C成品胶出库;

            try {
                var orderList = db.Queryable<TN_Outbound_Order>()
@@ -218,7 +224,7 @@
                    .ToList();

                if (orderList.Count == 0) {
                    info += $"暂无待执行的{taskName}单";
                    info = $"轮询：{taskName}：暂无待执行的{taskName}单";
                    LogHelper.Info(info);
                    return;
                }
@@ -229,7 +235,7 @@
                        .Count(d => d.S_OO_NO == order.S_NO && d.N_B_STATE >= 2); // 执行中
                    var allCount = db.Queryable<TN_Outbound_Detail>()
                        .Count(d => d.S_OO_NO == order.S_NO);
                    info += $"统计{taskName}单'{order.S_NO}'任务已下发：{doingCount}/{allCount}";
                    info = $"轮询：{taskName}：统计{taskName}单'{order.S_NO}'任务已下发：{doingCount}/{allCount}";
                    LogHelper.Info(info);

                    if (doingCount == allCount) {
@@ -243,7 +249,7 @@
                        .First();

                    if (lastDetail != null) {
                        info += $"{taskName}单'{order.S_NO}'上一个任务仍在进行中：" + JsonConvert.SerializeObject(lastDetail);
                        info = $"轮询：{taskName}：{taskName}单'{order.S_NO}'上一个任务仍在进行中：" + JsonConvert.SerializeObject(lastDetail);
                        LogHelper.Info(info);
                        continue;
                    }
@@ -253,7 +259,7 @@
                        .First();

                    if (outboundDetail == null) {
                        info += $"仍有任务未执行完成，但当前没有已下发的任务";
                        info = $"轮询：{taskName}：仍有任务未执行完成，但当前没有已下发的任务";
                        LogHelper.Info(info);
                        continue;
                    }
@@ -269,13 +275,14 @@
                foreach (var detail in detailList) {
                    var startLoc = db.Queryable<TN_Location>()
                        .LeftJoin<TN_Loc_Container>((l, c) => l.S_CODE == c.S_LOC_CODE)
                        .Where((l, c) => c.S_CNTR_CODE == detail.S_CNTR_CODE)
                        .Where((l, c) => c.S_CNTR_CODE == detail.S_CNTR_CODE) // 根据容器号搜索起点货位
                        .Where(l => l.N_LOCK_STATE == 0 && l.S_LOCK_STATE == "无" && l.C_ENABLE == "Y") // 筛选：未上锁
                        .Where(l => l.N_CURRENT_NUM == 1)
                        .First();

                    if (startLoc == null) {
                        LogHelper.Info($"轮询--{taskName}：没有找到合适的起点货位！");
                        info = $"轮询：{taskName}：没有找到合适的起点货位！";
                        LogHelper.Info(info);
                        continue;
                    }

@@ -285,22 +292,25 @@
                        .Where(a => a.N_CURRENT_NUM == 0).First();

                    if (endLoc == null) {
                        LogHelper.Info($"轮询--{taskName}：没有找到合适的终点货位！单号'{detail.S_OO_NO}'要求终点库区为'{detail.S_END_AREA}'");
                        info = $"轮询：{taskName}：没有找到合适的终点货位！单号'{detail.S_OO_NO}'要求终点库区为'{detail.S_END_AREA}'";
                        LogHelper.Info(info);
                        continue;
                    }

                    
                    detail.N_B_STATE = 2;

                    var cntId = detail.S_CNTR_CODE;
                    var task = WCSHelper.BuildTask(startLoc, endLoc, cntId, taskName);

                    LocationHelper.LockLoc(ref startLoc, 2); // 起点出库锁
                    LocationHelper.LockLoc(ref endLoc, 1); // 终点入库锁
                    var erp_no = string.IsNullOrEmpty(detail.S_BS_NO) ? "" : detail.S_BS_NO;
                    var task = WCSHelper.BuildTask(startLoc, endLoc, cntId, taskName, detail.S_OO_NO, erp_no);

                    LocationHelper.LockStartLoc(ref startLoc); // 起点出库锁
                    LocationHelper.LockEndLoc(ref endLoc); // 终点入库锁

                    using (var tran = db.Ado.UseTran()) {
                        if (db.Updateable<TN_Outbound_Detail>(detail).UpdateColumns(it => it.N_B_STATE).ExecuteCommand() <= 0) {
                            tran.RollbackTran();
                            info += $"修改明细表状态为完成--失败！";
                            info = $"轮询：{taskName}：修改明细表状态为完成--失败！";
                            LogHelper.Info(info);
                            continue;
                        }
@@ -312,10 +322,11 @@
                            it.T_MODIFY
                        }).ExecuteCommand() <= 0) {
                            tran.RollbackTran();
                            info += $"生成任务'{taskName}'失败：更新起点货位{startLoc.S_CODE}锁状态失败";
                            info = $"轮询：{taskName}：生成任务'{taskName}'失败：更新起点货位{startLoc.S_CODE}锁状态失败";
                            LogHelper.Info(info);
                            continue;
                        }


                        if (db.Updateable<TN_Location>(endLoc).UpdateColumns(it => new {
                            it.N_LOCK_STATE,
@@ -324,20 +335,20 @@
                            it.T_MODIFY
                        }).ExecuteCommand() <= 0) {
                            tran.RollbackTran();
                            info += $"生成任务'{taskName}'失败：更新终点货位{endLoc.S_CODE}锁状态失败";
                            info = $"轮询：{taskName}：生成任务'{taskName}'失败：更新终点货位{endLoc.S_CODE}锁状态失败";
                            LogHelper.Info(info);
                            continue;
                        }

                        if (db.Insertable<TN_Task>(task).ExecuteCommand() <= 0) {
                            tran.RollbackTran();
                            info += $"生成任务'{taskName}'失败，容器号{cntId}，起点{startLoc.S_CODE}，终点货架{endLoc.S_CODE}";
                            info = $"轮询：{taskName}：生成任务'{taskName}'失败，容器号{cntId}，起点{startLoc.S_CODE}，终点货架{endLoc.S_CODE}";
                            LogHelper.Info(info);
                            continue;
                        }

                        tran.CommitTran();
                        info += $"生成任务'{taskName}'成功，容器号{cntId}，起点{startLoc.S_CODE}，终点货架{endLoc.S_CODE}";
                        info = $"轮询：{taskName}：生成任务'{taskName}'成功，容器号{cntId}，起点{startLoc.S_CODE}，终点货架{endLoc.S_CODE}";
                        LogHelper.Info(info);
                        continue;
                    }
@@ -376,15 +387,16 @@

            }
            catch (Exception ex) {
                info += $"发生了异常：{ex.Message}";
                info = $"轮询：{taskName}：发生了异常：{ex.Message}";
                LogHelper.InfoEx(ex);
            }
        }

        public static void CheckCheckOrder() {
            var taskName = TaskName.C抽检_出库;
            var db = new SqlHelper<object>().GetInstance();
            var info = "";

            var taskName = TaskName.C抽检_出库;

            try {
                var orderList = db.Queryable<TN_Spot_Check>()
@@ -393,7 +405,7 @@
                    .ToList();

                if (orderList.Count == 0) {
                    LogHelper.Info($"轮询--{taskName}--暂无待执行的{taskName}单");
                    LogHelper.Info($"轮询：{taskName}：暂无待执行的{taskName}单");
                    return;
                }

@@ -403,7 +415,7 @@
                        .Count(d => d.S_OO_NO == order.S_NO && d.N_B_STATE >= 2); // 执行中
                    var allCount = db.Queryable<TN_SpotCheck_Detail>()
                        .Count(d => d.S_OO_NO == order.S_NO);
                    LogHelper.Info($"轮询--{taskName}--统计{taskName}单'{order.S_NO}'任务已下发：{doingCount}/{allCount}");
                    LogHelper.Info($"轮询：{taskName}：统计{taskName}单'{order.S_NO}'任务已下发：{doingCount}/{allCount}");

                    if (doingCount == allCount) {
                        order.N_B_STATE = 2; // 所有任务都已执行
@@ -416,7 +428,7 @@
                        .ToList();

                    if (checkDetailList.Count == 0) {
                        LogHelper.Info($"轮询--{taskName}--仍有任务未执行完成，但当前没有已下发的任务");
                        LogHelper.Info($"轮询：{taskName}：仍有任务未执行完成，但当前没有已下发的任务");
                        continue;
                    }

@@ -432,7 +444,7 @@
                        .First();

                    if (startLoc == null) {
                        LogHelper.Info($"轮询--{taskName}：没有找到合适的起点货位！");
                        LogHelper.Info($"轮询：{taskName}：没有找到合适的起点货位！");
                        continue;
                    }

@@ -442,22 +454,22 @@
                        .Where(a => a.N_CURRENT_NUM == 0).First();

                    if (endLoc == null) {
                        LogHelper.Info($"轮询--{taskName}：没有找到合适的终点货位！");
                        LogHelper.Info($"轮询：{taskName}：没有找到合适的终点货位！");
                        continue;
                    }

                    detail.N_B_STATE = 2;

                    var cntId = detail.S_CNTR_CODE;
                    var task = WCSHelper.BuildTask(startLoc, endLoc, cntId, taskName);
                    var task = WCSHelper.BuildTask(startLoc, endLoc, cntId, taskName, detail.S_OO_NO);

                    LocationHelper.LockLoc(ref startLoc, 2); // 起点出库锁
                    LocationHelper.LockLoc(ref endLoc, 1); // 终点入库锁
                    LocationHelper.LockStartLoc(ref startLoc); // 起点出库锁
                    LocationHelper.LockEndLoc(ref endLoc); // 终点入库锁

                    using (var tran = db.Ado.UseTran()) {
                        if (db.Updateable<TN_SpotCheck_Detail>(detail).UpdateColumns(it => it.N_B_STATE).ExecuteCommand() <= 0) {
                            tran.RollbackTran();
                            LogHelper.Info($"轮询--{taskName}：修改{taskName}单明细表状态为完成--失败！");
                            LogHelper.Info($"轮询：{taskName}：修改{taskName}单明细表状态为完成--失败！");
                            continue;
                        }

@@ -515,7 +527,7 @@
                    .ToList();

                if (orderList.Count == 0) {
                    LogHelper.Info($"轮询--{taskName}--暂无待执行的{taskName}单");
                    LogHelper.Info($"轮询：{taskName}：暂无待执行的{taskName}单");
                    return;
                }

@@ -525,7 +537,7 @@
                        .Count(d => d.S_OO_NO == order.S_NO && d.N_B_STATE >= 2); // 执行中
                    var allCount = db.Queryable<TN_RelocationList_Detail>()
                        .Count(d => d.S_OO_NO == order.S_NO);
                    LogHelper.Info($"轮询--{taskName}--统计{taskName}单'{order.S_NO}'任务已下发：{doingCount}/{allCount}");
                    LogHelper.Info($"轮询：{taskName}：统计{taskName}单'{order.S_NO}'任务已下发：{doingCount}/{allCount}");

                    if (doingCount == allCount) {
                        order.N_B_STATE = 2; // 所有任务都已执行
@@ -538,7 +550,7 @@
                        .ToList();

                    if (checkDetailList.Count == 0) {
                        LogHelper.Info($"轮询--{taskName}--仍有任务未执行完成，但当前没有已下发的任务");
                        LogHelper.Info($"轮询：{taskName}：仍有任务未执行完成，但当前没有已下发的任务");
                        continue;
                    }

@@ -556,7 +568,7 @@
                        .First();

                    if (startLoc == null) {
                        LogHelper.Info($"轮询--{taskName}：没有找到合适的起点货位！");
                        LogHelper.Info($"轮询：{taskName}：没有找到合适的起点货位！");
                        continue;
                    }

@@ -566,22 +578,22 @@
                        .Where(a => a.N_CURRENT_NUM == 0).First();

                    if (endLoc == null) {
                        LogHelper.Info($"轮询--{taskName}：没有找到合适的终点货位！");
                        LogHelper.Info($"轮询：{taskName}：没有找到合适的终点货位！");
                        continue;
                    }

                    detail.N_B_STATE = 2;

                    var cntId = detail.S_CNTR_CODE;
                    var task = WCSHelper.BuildTask(startLoc, endLoc, cntId, taskName);
                    var task = WCSHelper.BuildTask(startLoc, endLoc, cntId, taskName, detail.S_OO_NO);

                    LocationHelper.LockLoc(ref startLoc, 2); // 起点出库锁
                    LocationHelper.LockLoc(ref endLoc, 1); // 终点入库锁
                    LocationHelper.LockStartLoc(ref startLoc); // 起点出库锁
                    LocationHelper.LockEndLoc(ref endLoc); // 终点入库锁

                    using (var tran = db.Ado.UseTran()) {
                        if (db.Updateable<TN_RelocationList_Detail>(detail).UpdateColumns(it => it.N_B_STATE).ExecuteCommand() <= 0) {
                            tran.RollbackTran();
                            LogHelper.Info($"轮询--{taskName}：修改{taskName}单明细表状态为完成--失败！");
                            LogHelper.Info($"轮询：{taskName}：修改{taskName}单明细表状态为完成--失败！");
                            continue;
                        }