1

zxx

7 天以前 da7196f0acb1349fe0bc6b3b652093b495416adc

 HH.WCS.Mobox3/HH.WCS.Mobox3.XiaoMi/process/TaskProcess.cs

@@ -48,32 +48,14 @@
            {
                Console.WriteLine($"任务{mst.S_CODE} 货位{mst.S_START_LOC}取货完成，起点解绑容器{mst.S_CNTR_CODE}");
                LogHelper.Info($"任务{mst.S_CODE} 货位{mst.S_START_LOC}取货完成，起点解绑容器{mst.S_CNTR_CODE}");
                if (mst.S_FRAME_CODE != null)
                {
                    LocationHelper.UnBindingLocHj(mst.S_START_LOC, mst.S_FRAME_CODE);
                LocationHelper.UnBindingLoc(mst.S_START_LOC, mst.S_CNTR_CODE.Split(',').ToList());

                }
                else
                {
                    LocationHelper.UnBindingLoc(mst.S_START_LOC, mst.S_CNTR_CODE.Split(',').ToList());

                }
            }
            else
            {
                Console.WriteLine($"任务{mst.S_CODE} 货位{mst.S_END_LOC}卸货完成，终点绑定容器{mst.S_CNTR_CODE}");
                LogHelper.Info($"任务{mst.S_CODE} 货位{mst.S_END_LOC}卸货完成，终点绑定容器{mst.S_CNTR_CODE}");
                //如果货架有值则绑货架
                if (mst.S_FRAME_CODE!=null)
                {
                    LocationHelper.BindingLocHj(mst.S_END_LOC, mst.S_FRAME_CODE);

                }
                else
                {
                    LocationHelper.BindingLoc(mst.S_END_LOC, mst.S_CNTR_CODE.Split(',').ToList());

                }
                LocationHelper.BindingLoc(mst.S_END_LOC, mst.S_CNTR_CODE.Split(',').ToList());
            }

        }
@@ -140,9 +122,15 @@
            if (state == 7)
            {
                CacheBitCancelUpdate(mst);
                ////小米订单取消
                //CancelModel cancelModel = new CancelModel();
                //cancelModel.order_id = mst.S_WORKSHOP_NO;
                //cancelModel.order_command_type_id = "2";
                //RcsHelper.CancelOrder(cancelModel);

            }
        }
        

        private static object locLocker = new object();

        /// <summary>
@@ -383,26 +371,92 @@
                //var endLoc = LocationHelper.GetLoc(mst.S_END_LOC);
                if (mst.S_START_LOC != null && mst.S_END_LOC != null)
                {
                    string src = $"\"src\":\"{mst.S_START_LOC}\",";
                    string dst = $"\"dst\":\"{mst.S_END_LOC}\",";
                    string carrier_type_id = $"\"carrier_type_id\":\"1\"";
                    string parmeS = "{";
                    string parmeD = "}";
                    string parme = parmeS + src + dst + carrier_type_id + parmeD;
                    
                    LogHelper.Info($"推送任务参数{parme}", "任务");
                    AntsTaskModel model = new AntsTaskModel();
                    model.order_name = mst.S_CODE;
                    model.priority = 1;
                    model.dead_line = DateTime.Now.ToString();
                    model.ts_name = mst.S_TYPE;
                    model.parameters = parme;
                    //model.parameters = new AntsParasModel { 
                    //    src = mst.S_START_LOC,
                    //    dst = mst.S_END_LOC,
                    //    carrier_type_id="-99"
                    //};
                    var res = RcsHelper.CreateAntsOrder(model);
                    bool res = false;
                    if (mst.S_TYPE == "大件")
                    {
                        string src = $"\"src\":\"{mst.S_START_LOC}\",";
                        string dst = $"\"dst\":\"{mst.S_END_LOC}\",";
                        string carrier_type_id = $"\"carrier_type_id\":\"1\"";
                        string parmeS = "{";
                        string parmeD = "}";
                        string parme = parmeS + src + dst + carrier_type_id + parmeD;

                        LogHelper.Info($"推送任务参数{parme}", "任务");
                        AntsTaskModel model = new AntsTaskModel();
                        model.order_name = mst.S_CODE;
                        model.priority = 1;
                        model.dead_line = DateTime.Now.ToString();
                        model.ts_name = mst.S_TYPE;
                        model.parameters = parme;
                        //model.parameters = new AntsParasModel { 
                        //    src = mst.S_START_LOC,
                        //    dst = mst.S_END_LOC,
                        //    carrier_type_id="-99"
                        //};
                        res = RcsHelper.CreateAntsOrder(model);
                    }
                    else if (mst.S_TYPE == "小件通用车型")
                    {
                        string src = $"\"src\":\"{mst.S_START_LOC}\",";
                        string dst = $"\"dst\":\"{mst.S_END_LOC}\",";
                        string car_type = $"\"car_type\":\"1\",";
                        string src_ort = $"\"src_ort\":\"-1\",";
                        string dst_ort = $"\"dst_ort\":\"-1\"";
                        string parmeS = "{";
                        string parmeD = "}";
                        string parme = parmeS + src + dst + car_type + src_ort + dst_ort + parmeD;

                        LogHelper.Info($"推送任务参数{parme}", "任务");

                        PickingTaskModel model = new PickingTaskModel();
                        model.order_name = mst.S_CODE;
                        model.priority = 1;
                        model.dead_line = DateTime.Now.ToString();
                        model.ts_name = "p2p";
                        model.parameters = parme;
                        //model.parameters = new AntsParasModel { 
                        //    src = mst.S_START_LOC,
                        //    dst = mst.S_END_LOC,
                        //    carrier_type_id="-99"
                        //};
                        res = RcsHelper.CreatePickingOrder(model);
                    }
                    else if (mst.S_TYPE == "inbound")
                    {
                        //查出货架编码
                        var db = new SqlHelper<Object>().GetInstance();
                        var locFrameRel = db.Queryable<LocFrameRel>().Where(a => a.S_LOC_CODE == mst.S_START_LOC).First();
                        string tote_id = $"\"tote_id\":\"{locFrameRel.S_FRAME_CODE}\",";
                        string task_type = $"\"task_type\":\"{mst.S_TYPE}\",";
                        string src = $"\"src\":\"{mst.S_START_LOC}\",";
                        string dst = $"\"dst\":\"{mst.S_END_LOC}\",";

                        string extra_info = $"\"extra_info\":";
                        string layer = $"\"layer\":[1,2,3,4],";
                        string put = $"\"put\":true";
                        string parmeS = "{";
                        string parmeD = "}";
                        string parmezS = "[";
                        string parmezD = "]";
                        string parme = parmeS + tote_id + task_type + src + dst + extra_info + parmezS+ parmeS  + layer + put + parmeD + parmezD + parmeD;

                        LogHelper.Info($"推送任务参数{parme}", "任务");

                        PickingTaskModel model = new PickingTaskModel();
                        model.order_name = mst.S_CODE;
                        model.priority = 1;
                        model.dead_line = DateTime.Now.ToString();
                        model.ts_name = "picking_ts";
                        model.parameters = parme;
                        //model.parameters = new AntsParasModel { 
                        //    src = mst.S_START_LOC,
                        //    dst = mst.S_END_LOC,
                        //    carrier_type_id="-99"
                        //};
                        res = RcsHelper.CreatePickingOrder(model);
                    }


                    if (res)
                    {
                        //更新任务状态
@@ -456,14 +510,15 @@
            return result;
        }
        //小米大件
        public static bool CreateTransportDj(string start, string end, string taskType, string cntrs,string orderName, int startLayer, int endLayer, int trayCarryCount = 1, int priority = 1)
        public static bool CreateTransportDj(string start, string end, string taskType, string cntrs, string orderName, int startLayer, int endLayer, int trayCarryCount = 1, int priority = 1)
        {
            var result = false;
            var trayCodes = cntrs;
            var taskNo = DateTime.Now.Ticks.ToString();


            var res = WCSHelper.CreateTaskDj(taskNo, start.Trim(), end.Trim(), taskType, priority, trayCodes, orderName,trayCarryCount, startLayer, endLayer);

            var res = WCSHelper.CreateTaskDj(taskNo, start.Trim(), end.Trim(), taskType, priority, trayCodes, orderName, trayCarryCount, startLayer, endLayer);
            if (res)
            {
                result = true;
@@ -788,7 +843,7 @@
                        result = list.OrderBy(s => s.N_ROW).ThenBy(x => x.N_COL).FirstOrDefault();

                    }
                    

                }

            }
@@ -974,7 +1029,7 @@
                            Message = $"{model.parameters.src}库位已被锁定!";
                        }
                        endLocStr = model.parameters.dst;
                        

                        break;
                    case "p2a":
                        startLoc = db.Queryable<Location>().Where(a => a.S_CODE == model.parameters.src).First();
@@ -983,7 +1038,7 @@
                            Message = $"{model.parameters.src}库位已被锁定!";
                        }
                        var endLoc = InWorkTransport(model.parameters.dst_area);
                        if (endLoc==null)
                        if (endLoc == null)
                        {
                            //如果没找到就等第一条
                            endLocStr = db.Queryable<Location>().Where(a => a.S_AREA_CODE.Trim() == model.parameters.dst).OrderByDescending(a => a.N_ROW).ToList()[0].S_CODE;
@@ -992,7 +1047,7 @@
                        break;
                    case "a2p":
                        startLoc = OutWorkTransport(model.parameters.src_area);
                        if (startLoc==null)
                        if (startLoc == null)
                        {
                            Message = $"{model.parameters.dst}库区没有可出货位!";
                        }
@@ -1023,7 +1078,7 @@
                        break;
                }

                LogHelper.Info($"bigMaterial  接收参数{JsonConvert.SerializeObject(model) }");
                LogHelper.Info($"bigMaterial  接收参数{JsonConvert.SerializeObject(model)}");
                //创建托盘货位绑定关系
                string trayCode = ContainerHelper.GenerateCntrNo();
                //绑定起点货位(产线)和物料
@@ -1031,8 +1086,8 @@

                var locCntrRel = db.Queryable<LocCntrRel>().Where(a => a.S_LOC_CODE == startLoc.S_CODE).First();
                //创建任务
                LogHelper.Info($"创建任务 起点:{startLoc.S_CODE}终点:{endLocStr}", model.ts_name);
                var res = TaskProcess.CreateTransportDj(startLoc.S_CODE, endLocStr, model.ts_name, locCntrRel.S_CNTR_CODE, model.order_name, 1, 1);
                LogHelper.Info($"创建任务 起点:{startLoc.S_CODE}终点:{endLocStr}", "大件");
                var res = TaskProcess.CreateTransportDj(startLoc.S_CODE, endLocStr, "大件", locCntrRel.S_CNTR_CODE, model.order_name, 1, 1);
                if (!res)
                {
                    return new TaskResponse
@@ -1075,126 +1130,116 @@

        }

        
        //public static TaskResponse smallMaterial(smallMaterial model) {
        //    var db = new SqlHelper<Location>().GetInstance();
        //小件
        public static TaskResponse smallMaterial(smallMaterial model)
        {
            var db = new SqlHelper<Location>().GetInstance();
            try
            {
                string Message = null;

        //    string Message = null;

        //    //拆分成两条任务，一条是料架到指定的缓存区，二是料架上的托盘到指定的工位（小米wcs传）一对多
        //    var startFrame = db.Queryable<LocFrameRel>().Where(a => a.S_LOC_CODE == model.taskList[0].parameters[0].src).First();

        //    var startLoc = db.Queryable<Location>().Where(a => a.S_CODE == startFrame.S_FRAME_CODE).First();
        //    if (startLoc == null || startLoc.N_LOCK_STATE != 0)
        //    {
        //        return new TaskResponse
        //        {
        //            header = new ResponseHead { code = 0, desc = $"{model.taskList[0].parameters[0].src}库位已被锁定!" }
        //        };
        //    }
        //    var endLoc = TaskProcess.InWorkTransport(model.shippingRoute);
        //    if (endLoc != null)
        //    {
        //        //创建到缓存区任务
        //        var locCntrRel = db.Queryable<LocCntrRel>().Where(a => a.S_LOC_CODE == startLoc.S_CODE).First();
        //        //创建任务
        //        LogHelper.Info($"创建任务 起点:{startLoc.S_CODE}终点:{endLoc.S_CODE}", model.ts_name);
        //        var res = TaskProcess.CreateTransportHj(startLoc.S_CODE, endLoc.S_CODE, model.ts_name, locCntrRel.S_FRAME_CODE, 1, 1);
        //        if (!res)
        //        {
        //            return new TaskResponse
        //            {
        //                header = new ResponseHead { code = 0, desc = "自动上线任务创建失败" }
        //            }; 
        //        }
        //    }
        //    //料架上的托盘到指定的工位
        //    foreach (var parameter in model.parameters)
        //    {
        //        var startLocHj = db.Queryable<Location>().Where(a => a.S_CODE == parameter.src).First();
        //        if (startLocHj == null || startLocHj.N_LOCK_STATE != 0)
        //        {
        //             Message = Message==null? $"{model.parameters[0].src}库位已被锁定!": Message+ $"{model.parameters[0].src}库位已被锁定!";
        //        }
        //        else
        //        {
        //            //货架上的货判断一下货架有没有锁
        //            var startFrameParent = db.Queryable<LocFrameRel>().Where(a => a.S_LOC_CODE == parameter.src).First();
        //            if (startFrameParent != null)
        //            {
        //                var startLocParent = db.Queryable<Location>().Where(a => a.S_CODE == startFrameParent.S_FRAME_CODE).First();
        //                if (startLocParent == null || startLocParent.N_LOCK_STATE != 0)
        //                {
        //                    return new TaskResponse
        //                    {
        //                        header = new ResponseHead { code = 0, desc = $"{startFrameParent.S_FRAME_CODE}货架已被锁定!" }
        //                    };
        //                }
        //            }
        //            var endLocHj = db.Queryable<Location>().Where(a => a.S_CODE == parameter.dst).First();
        //            if (endLocHj == null || endLocHj.N_LOCK_STATE != 0 || endLocHj.C_ENABLE != "Y")
        //            {
        //                //应该绕路

        //                Message = Message == null ? $"{parameter.dst}库位已被锁定!" : Message + $"{parameter.dst}库位已被锁定!";
        //            }
        //            else
        //            {
        //                //货架上的货判断一下货架有没有锁
        //                var endFrameParent = db.Queryable<LocFrameRel>().Where(a => a.S_LOC_CODE == parameter.dst).First();
        //                if (endFrameParent != null)
        //                {
        //                    var endLocParent = db.Queryable<Location>().Where(a => a.S_CODE == endFrameParent.S_FRAME_CODE).First();
        //                    if (endLocParent == null || endLocParent.N_LOCK_STATE != 0)
        //                    {
        //                        return new TaskResponse
        //                        {
        //                            header = new ResponseHead { code = 0, desc = $"{endFrameParent.S_FRAME_CODE}货架已被锁定!" }
        //                        };
        //                    }
        //                }
        //                //创建到缓存区任务
        //                var locCntrRel1 = db.Queryable<LocCntrRel>().Where(a => a.S_LOC_CODE == startLocHj.S_CODE).First();
        //                //创建任务
        //                LogHelper.Info($"创建任务 起点:{startLocHj.S_CODE}终点:{endLocHj.S_CODE}", model.ts_name);
        //                var res = TaskProcess.CreateTransport(startLocHj.S_CODE, endLocHj.S_CODE, model.ts_name, locCntrRel1.S_CNTR_CODE, 1, 1);
        //                if (!res)
        //                {
        //                    return new TaskResponse
        //                    {
        //                        header = new ResponseHead { code = 0, desc = "自动上线任务2创建失败" }
        //                    };
        //                }

        //            }
                //拆分成两条任务，一条是料架到指定的缓存区，二是料架上的托盘到指定的工位（小米wcs传）一对多
                var startLoc = db.Queryable<Location>().Where(a => a.S_CODE == model.taskList[0].parameters.src).First();
                if (startLoc == null || startLoc.N_LOCK_STATE != 0)
                {
                    return new TaskResponse
                    {
                        header = new ResponseHead { code = 0, desc = $"{model.taskList[0].parameters.src}库位已被锁定!" }
                    };
                }
                var endLoc = TaskProcess.InWorkTransport(model.shippingRoute);
                if (endLoc != null)
                {
                    ////创建到缓存区任务
                    //var locCntrRel = db.Queryable<LocCntrRel>().Where(a => a.S_LOC_CODE == startLoc.S_CODE).First();
                    
        //        }
        //    }
        //    var result = new TaskResponse();
        //    if (Message != null)
        //    {
        //        result = new TaskResponse
        //        {
        //            header = new ResponseHead { code = 0, desc = Message }
        //        };
        //    }
        //    else
        //    {
        //        result = new TaskResponse
        //        {
        //            header = new ResponseHead { code = 200, desc = "SUCCESS" },
        //            body = new ResponseBody
        //            {
        //                msg = "success",
        //                app_name = "Guozi client",
        //                data = new List<ResponseData> { new ResponseData { in_order_id = model.taskID } },
        //                version = ""
        //            }
        //        };
        //    }
        //    return result;
        //}
        
                    //找p2a的任务编码
                    var order_name = model.taskList.Find(s=>s.ts_name=="p2a").order_name;
                    //创建任务
                    LogHelper.Info($"创建任务 起点:{startLoc.S_CODE}终点:{endLoc.S_CODE}", "小件通用车型");
                    var res = TaskProcess.CreateTransportDj(startLoc.S_CODE, endLoc.S_CODE, "小件通用车型", model.rackNumber, order_name, 1, 1);
                    if (!res)
                    {
                        return new TaskResponse
                        {
                            header = new ResponseHead { code = 0, desc = "自动上线任务创建失败" }
                        };
                    }
                }
                //料架上的托盘到指定的工位
                foreach (var tasklist in model.taskList)
                {
                    if (tasklist.ts_name == "p2p")
                    {
                        //先绑定料架和料箱位
                        ContainerHelper.BindLocCntrsXmLj(tasklist.rackPosition, model.rackNumber);

                        var startloc = db.Queryable<Location>().Where(a => a.S_CODE == tasklist.rackPosition).First();
                        if (startloc == null || startloc.N_LOCK_STATE != 0)
                        {
                            return new TaskResponse
                            {
                                header = new ResponseHead { code = 0, desc = $"{startloc.S_CODE}库位已被锁定!" }
                            };
                        }
                        var endlocstr = tasklist.parameters.dst;

                        //创建托盘货位绑定关系
                        string trayCode = ContainerHelper.GenerateCntrNo();
                        //绑定起点货位(产线)和物料
                        ContainerHelper.BindLocCntrsXm(startloc.S_CODE, trayCode, tasklist.parameters.sku, "", tasklist.parameters.BatchNo, tasklist.parameters.issueMode, tasklist.parameters.num);

                        var locCntrRel = db.Queryable<LocCntrRel>().Where(a => a.S_LOC_CODE == startloc.S_CODE).First();
                        //创建任务
                        LogHelper.Info($"创建任务 起点:{startloc.S_CODE}终点:{endlocstr}", "inbound");
                        var res = TaskProcess.CreateTransportDj(startloc.S_CODE, endlocstr, "inbound", locCntrRel.S_CNTR_CODE, tasklist.order_name, 1, 1);
                        if (!res)
                        {
                            return new TaskResponse
                            {
                                header = new ResponseHead { code = 1, desc = Message }
                            };

                        }

                    }

                }
                var result = new TaskResponse();
                if (Message != null)
                {
                    result = new TaskResponse
                    {
                        header = new ResponseHead { code = 0, desc = Message }
                    };
                }
                else
                {
                    result = new TaskResponse
                    {
                        header = new ResponseHead { code = 200, desc = "SUCCESS" },
                        body = new ResponseBody
                        {
                            msg = "success",
                            app_name = "Guozi client",
                            data = new List<ResponseData> { new ResponseData { in_order_id = model.taskList[0].taskID } },
                            version = ""
                        }
                    };
                }
                return result;



            }
            catch (Exception ex)
            {
                Console.WriteLine("smallMaterial:" + ex.Message + ex.StackTrace);
                LogHelper.Error("smallMaterial:" + ex.Message, ex);
                throw;
            }
        }



    }