~zhao/AutoWMS.HCZC.git

			@@ -782,35 +782,6 @@
			Log.Info("处理位置信息位置三：", JsonConvert.SerializeObject(entity));
			}

			private OperateResult TransportSuccess(TN_WM_SERVICE_EXECEntity _serviceExec)
			{
			return UseTransaction(trans =>
			{
			if (_serviceExec.Update)
			{
			var or = BLLCreator.CreateDapper<TN_WM_SERVICE_EXECEntity>().Update(new
			{
			CN_S_START_LOCATION = _serviceExec.CN_S_START_LOCATION,
			CN_S_END_LOCATION = _serviceExec.CN_S_END_LOCATION,
			CN_C_COMPLETE = _serviceExec.CN_C_COMPLETE,
			CN_C_SEND_MES = _serviceExec.CN_C_SEND_MES,
			CN_S_MSG = _serviceExec.CN_S_MSG
			}, new
			{
			CN_S_TASK_NO = _serviceExec.CN_S_TASK_NO
			});
			if (!or.Success)
			throw new Exception(or.Msg);
			}
			else
			{
			var or = BLLCreator.CreateDapper<TN_WM_SERVICE_EXECEntity>().Add(_serviceExec);
			if (!or.Success)
			throw new Exception(or.Msg);
			}
			});
			}

			#region 服务执行记录日志分页
			/// <summary>
			/// 服务执行记录日志分页
			@@ -1198,1648 +1169,6 @@
			Log.DomainInfo("SelfManageTask Error", ex.Message);
			}
			}

			#region 货位状态

			// 接驳位锁定状态：预入库锁定、预出库锁定
			// 接驳位空闲状态：正常
			// 准备点状态同接驳位
			// 立库锁定状态：预入库锁定、预出库锁定
			// 立库空闲状态：空(入库前)、满(出库前)

			// 创建任务前、执行任务前检查货位状态
			// 完成任务后清除货位状态
			// 执行失败后如何处理?

			#endregion

			#region 半成品

			#region 空托出库

			/// <summary>
			/// 创建空托出库并行子任务
			/// </summary>
			public OperateResult ExecBCP_KTCK_Add(TN_WM_TASKEntity task, ConnectBitDto bit)
			{
			OperateResult re = OperateResult.Error("未知错误");

			try
			{
			// 空托出库和满托入库是反向的
			// 接驳位
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});
			// 准备点
			var readyBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.readybit
			});
			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			if (readyBit == null)
			throw new Exception("未找到准备点货位：" + bit.readybit);
			if (readyBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("准备点货位：" + bit.readybit + "存在未执行完的任务");

			// 立库->接驳位
			TN_WM_TASKEntity taskEntity1 = new TN_WM_TASKEntity()
			{
			CN_S_TASK_NO = task.CN_S_TASK_NO + "_1",
			CN_S_TRAY_CODE = task.CN_S_TRAY_CODE,
			CN_S_STATE = Constants.TaskState_NoExecuted,
			CN_S_BF_TASK_NO = "",
			CN_S_AF_TASK_NO = "",
			CN_S_STOCK_CODE = task.CN_S_STOCK_CODE,
			CN_S_START_AREA = task.CN_S_END_AREA,
			CN_S_START_BIT = task.CN_S_END_BIT,
			CN_S_END_AREA = connectBit.CN_S_AREA_CODE,
			CN_S_END_BIT = connectBit.CN_S_LOCATION_CODE,
			CN_N_PRIORITY = 1,
			CN_S_CREATOR = "sys",
			CN_S_CREATOR_BY = "sys",
			CN_T_CREATE = DateTime.Now,
			CN_T_MODIFY = DateTime.Now,
			CN_S_REMARK = "",
			CN_S_TASK_FLAG = Constants.TaskFlag_ZG,
			CN_S_EXT1 = task.CN_S_TASK_NO,
			CN_S_EXT2 = TaskFlagConstants.BCP_KTCK_SUB_1,
			CN_S_EXT3 = ""
			};
			// 准备点->线边
			TN_WM_TASKEntity taskEntity2 = new TN_WM_TASKEntity()
			{
			CN_S_TASK_NO = task.CN_S_TASK_NO + "_2",
			CN_S_TRAY_CODE = task.CN_S_TRAY_CODE,
			CN_S_STATE = Constants.TaskState_NoExecuted,
			CN_S_BF_TASK_NO = "",
			CN_S_AF_TASK_NO = "",
			CN_S_STOCK_CODE = task.CN_S_STOCK_CODE,
			CN_S_START_AREA = readyBit.CN_S_AREA_CODE,
			CN_S_START_BIT = readyBit.CN_S_LOCATION_CODE,
			CN_S_END_AREA = task.CN_S_START_AREA,
			CN_S_END_BIT = task.CN_S_START_BIT,
			CN_N_PRIORITY = 1,
			CN_S_CREATOR = "sys",
			CN_S_CREATOR_BY = "sys",
			CN_T_CREATE = DateTime.Now,
			CN_T_MODIFY = DateTime.Now,
			CN_S_REMARK = "",
			CN_S_TASK_FLAG = Constants.TaskFlag_ZG,
			CN_S_EXT1 = task.CN_S_TASK_NO,
			CN_S_EXT2 = TaskFlagConstants.BCP_KTCK_SUB_2,
			CN_S_EXT3 = ""
			};

			UseTransaction(trans =>
			{
			// 创建半成品-空托出库子任务一
			re = CreateDapperDAL<TN_WM_TASKEntity>().Add(taskEntity1);
			if (!re.Success)
			throw new Exception(re.Msg);

			// 创建半成品-空托出库子任务二
			re = CreateDapperDAL<TN_WM_TASKEntity>().Add(taskEntity2);
			if (!re.Success)
			throw new Exception(re.Msg);

			// 主任务状态置为执行中记录接驳位
			re = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing,
			CN_S_CONNECT_BIT = bit.bit
			}, new { CN_S_TASK_NO = task.CN_S_TASK_NO }, trans);
			if (!re.Success)
			throw new Exception(re.Msg);
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("创建半成品-空托出库子任务失败，主任务编号=" + task.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}

			return re;
			}
			/// <summary>
			/// 执行空托出库的第一条子任务
			/// </summary>
			/// <param name="task"></param>
			/// <param name=""></param>
			/// <returns></returns>
			public OperateResult ExecBCP_KTCK_Sub1(TN_WM_TASKEntity task1, ConnectBitDto bit)
			{
			OperateResult or = OperateResult.Error("未知错误");

			try
			{
			// 执行前检查货位状态
			// 接驳位
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});
			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			UseTransaction(trans =>
			{
			// 立库预出库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_OutLock
			}, new { CN_S_LOCATION_CODE = task1.CN_S_START_BIT }, trans);
			// 接驳位预入库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_InLock
			}, new { CN_S_LOCATION_CODE = bit.bit }, trans);
			// 子任务1状态置为执行中
			or = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task1.CN_S_TASK_NO }, trans);
			// 发送Wcs任务
			Log.Detail(LogType.LogPara("调用WCS接口执行任务"), "任务信息：" + JsonConvert.SerializeObject(task1));
			or = BLLCreator.Create<OtherSysApi>().SendWcsCreateTask(task1);
			Log.Detail(LogType.LogPara("调用WCS接口执行任务"), "执行结果：" + JsonConvert.SerializeObject(or));
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("执行半成品-空托出库子任务一失败，任务编号=" + task1.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}
			return or;
			}
			/// <summary>
			/// 执行空托出库的第二条子任务
			/// </summary>
			/// <param name="task"></param>
			/// <param name="connectBit"></param>
			/// <returns></returns>
			public OperateResult ExecBCP_KTCK_Sub2(TN_WM_TASKEntity task2, ConnectBitDto bit)
			{
			OperateResult or = OperateResult.Error("未知错误");

			try
			{
			// 执行前检查货位状态
			// 接驳位的准备点货位
			var readyBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.readybit
			});
			if (readyBit == null)
			throw new Exception("未找到准备点货位：" + bit.readybit);
			if (readyBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("准备点货位：" + bit.readybit + "存在未执行完的任务");

			UseTransaction(trans =>
			{
			// 准备点预出库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_OutLock
			}, new { CN_S_LOCATION_CODE = bit.readybit }, trans);
			// 线边货位不管控

			// 子任务2状态置为执行中
			or = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task2.CN_S_TASK_NO }, trans);
			// 发送Ams任务
			Log.Detail(LogType.LogPara("调用AMS接口执行任务"), "任务信息：" + JsonConvert.SerializeObject(task2));
			or = BLLCreator.Create<OtherSysApi>().SendAmsTask(task2);
			Log.Detail(LogType.LogPara("调用AMS接口执行任务"), "执行结果：" + JsonConvert.SerializeObject(or));
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("执行半成品-空托出库子任务二失败，任务编号=" + task2.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}
			return or;
			}

			#endregion

			#region 满托入库

			/// <summary>
			/// 创建半成品-满托入库子任务一
			/// </summary>
			public OperateResult ExecBCP_MTRK_AddSub1(TN_WM_TASKEntity task, ConnectBitDto bit)
			{
			OperateResult re = OperateResult.Error("未知错误");

			try
			{
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});

			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			// 线边->接驳位
			TN_WM_TASKEntity taskEntity1 = new TN_WM_TASKEntity()
			{
			CN_S_TASK_NO = task.CN_S_TASK_NO + "_3",
			CN_S_TRAY_CODE = task.CN_S_TRAY_CODE,
			CN_S_STATE = Constants.TaskState_NoExecuted,
			CN_S_BF_TASK_NO = "",
			CN_S_AF_TASK_NO = "",
			CN_S_STOCK_CODE = task.CN_S_STOCK_CODE,
			CN_S_START_AREA = task.CN_S_START_AREA,
			CN_S_START_BIT = task.CN_S_START_BIT,
			CN_S_END_AREA = connectBit.CN_S_AREA_CODE,
			CN_S_END_BIT = connectBit.CN_S_LOCATION_CODE,
			CN_N_PRIORITY = 1,
			CN_S_CREATOR = "sys",
			CN_S_CREATOR_BY = "sys",
			CN_T_CREATE = DateTime.Now,
			CN_T_MODIFY = DateTime.Now,
			CN_S_REMARK = "",
			CN_S_TASK_FLAG = Constants.TaskFlag_ZG,
			CN_S_EXT1 = task.CN_S_TASK_NO,
			CN_S_EXT2 = TaskFlagConstants.BCP_MTRK_SUB_1,
			CN_S_EXT3 = ""
			};

			UseTransaction(trans =>
			{
			// 创建半成品-满托入库子任务一
			re = CreateDapperDAL<TN_WM_TASKEntity>().Add(taskEntity1);
			if (!re.Success)
			throw new Exception(re.Msg);

			// 主任务状态置为执行中
			re = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task.CN_S_TASK_NO }, trans);
			if (!re.Success)
			throw new Exception(re.Msg);
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("创建半成品-满托入库子任务一失败，任务编号=" + task.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}

			return re;
			}
			/// <summary>
			/// 创建半成品-满托入库子任务二
			/// </summary>
			public OperateResult ExecBCP_MTRK_AddSub2(TN_WM_TASKEntity task, ConnectBitDto bit)
			{
			OperateResult re = OperateResult.Error("未知错误");

			try
			{
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});

			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			// 接驳位->立库
			TN_WM_TASKEntity taskEntity2 = new TN_WM_TASKEntity()
			{
			CN_S_TASK_NO = task.CN_S_TASK_NO + "_4",
			CN_S_TRAY_CODE = task.CN_S_TRAY_CODE,
			CN_S_STATE = Constants.TaskState_NoExecuted,
			CN_S_BF_TASK_NO = "",
			CN_S_AF_TASK_NO = "",
			CN_S_STOCK_CODE = task.CN_S_STOCK_CODE,
			CN_S_START_AREA = connectBit.CN_S_AREA_CODE,
			CN_S_START_BIT = connectBit.CN_S_LOCATION_CODE,
			CN_S_END_AREA = task.CN_S_END_AREA,
			CN_S_END_BIT = task.CN_S_END_BIT,
			CN_N_PRIORITY = 1,
			CN_S_CREATOR = "sys",
			CN_S_CREATOR_BY = "sys",
			CN_T_CREATE = DateTime.Now,
			CN_T_MODIFY = DateTime.Now,
			CN_S_REMARK = "",
			CN_S_TASK_FLAG = Constants.TaskFlag_ZG,
			CN_S_EXT1 = task.CN_S_TASK_NO,
			CN_S_EXT2 = TaskFlagConstants.BCP_MTRK_SUB_2,
			CN_S_EXT3 = ""
			};

			UseTransaction(trans =>
			{
			// 创建满托入库子任务二
			re = CreateDapperDAL<TN_WM_TASKEntity>().Add(taskEntity2);
			if (!re.Success)
			throw new Exception(re.Msg);

			// 主任务状态置为执行中
			re = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task.CN_S_TASK_NO }, trans);
			if (!re.Success)
			throw new Exception(re.Msg);
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("创建半成品-满托入库子任务二失败，任务编号=" + task.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}

			return re;
			}

			/// <summary>
			/// 执行半成品-满托入库的第一条子任务
			/// </summary>
			/// <param name="task"></param>
			/// <param name=""></param>
			/// <returns></returns>
			public OperateResult ExecBCP_MTRK_Sub1(TN_WM_TASKEntity task1, ConnectBitDto bit)
			{
			OperateResult or = OperateResult.Error("未知错误");

			try
			{
			// 执行前检查货位状态
			// 接驳位
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});

			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			UseTransaction(trans =>
			{
			// 线边货位不管控

			// 接驳位预入库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_InLock
			}, new { CN_S_LOCATION_CODE = bit.bit }, trans);
			// 子任务一状态置为执行中
			or = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task1.CN_S_TASK_NO }, trans);
			// 发送Ams任务
			Log.Detail(LogType.LogPara("调用AMS接口执行任务"), "任务信息：" + JsonConvert.SerializeObject(task1));
			or = BLLCreator.Create<OtherSysApi>().SendAmsTask(task1);
			Log.Detail(LogType.LogPara("调用AMS接口执行任务"), "执行结果：" + JsonConvert.SerializeObject(or));
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("执行半成品-满托入库子任务一失败，任务编号=" + task1.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}
			return or;
			}
			/// <summary>
			/// 执行半成品-满托入库的第二条子任务
			/// </summary>
			/// <param name="task"></param>
			/// <param name="connectBit"></param>
			/// <returns></returns>
			public OperateResult ExecBCP_MTRK_Sub2(TN_WM_TASKEntity task2, ConnectBitDto bit)
			{
			OperateResult or = OperateResult.Error("未知错误");

			try
			{
			// 执行前检查货位状态
			// 接驳位
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});

			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			UseTransaction(trans =>
			{
			// 接驳位预出库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_OutLock
			}, new { CN_S_LOCATION_CODE = bit.bit }, trans);
			// 立库预入库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_InLock
			}, new { CN_S_LOCATION_CODE = task2.CN_S_END_BIT }, trans);

			// 子任务二状态置为执行中
			or = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task2.CN_S_TASK_NO }, trans);
			// 发送Wcs任务
			Log.Detail(LogType.LogPara("调用WCS接口执行任务"), "任务信息：" + JsonConvert.SerializeObject(task2));
			or = BLLCreator.Create<OtherSysApi>().SendWcsCreateTask(task2);
			Log.Detail(LogType.LogPara("调用WCS接口执行任务"), "执行结果：" + JsonConvert.SerializeObject(or));
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("执行半成品-满托入库子任务二失败，任务编号=" + task2.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}
			return or;
			}

			#endregion

			#endregion

			#region 成型机

			#region 半成品回库

			/// <summary>
			/// 创建成型机-半成品回库子任务一
			/// </summary>
			public OperateResult ExecCXJ_BCPHK_AddSub1(TN_WM_TASKEntity task, ConnectBitDto bit)
			{
			OperateResult re = OperateResult.Error("未知错误");

			try
			{
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});

			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			// 线边->接驳位
			TN_WM_TASKEntity taskEntity1 = new TN_WM_TASKEntity()
			{
			CN_S_TASK_NO = task.CN_S_TASK_NO + "_1",
			CN_S_TRAY_CODE = task.CN_S_TRAY_CODE,
			CN_S_STATE = Constants.TaskState_NoExecuted,
			CN_S_BF_TASK_NO = "",
			CN_S_AF_TASK_NO = "",
			CN_S_STOCK_CODE = task.CN_S_STOCK_CODE,
			CN_S_START_AREA = task.CN_S_START_AREA,
			CN_S_START_BIT = task.CN_S_START_BIT,
			CN_S_END_AREA = connectBit.CN_S_AREA_CODE,
			CN_S_END_BIT = connectBit.CN_S_LOCATION_CODE,
			CN_N_PRIORITY = 1,
			CN_S_CREATOR = "sys",
			CN_S_CREATOR_BY = "sys",
			CN_T_CREATE = DateTime.Now,
			CN_T_MODIFY = DateTime.Now,
			CN_S_REMARK = "",
			CN_S_TASK_FLAG = Constants.TaskFlag_ZG,
			CN_S_EXT1 = task.CN_S_TASK_NO,
			CN_S_EXT2 = TaskFlagConstants.CXJ_BCPHK_SUB_1,
			CN_S_EXT3 = ""
			};

			UseTransaction(trans =>
			{
			// 创建成型机-半成品回库子任务一
			re = CreateDapperDAL<TN_WM_TASKEntity>().Add(taskEntity1);
			if (!re.Success)
			throw new Exception(re.Msg);

			// 主任务状态置为执行中
			re = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task.CN_S_TASK_NO }, trans);
			if (!re.Success)
			throw new Exception(re.Msg);
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("创建成型机-半成品回库子任务一失败，任务编号=" + task.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}

			return re;
			}
			/// <summary>
			/// 创建成型机-半成品回库子任务二
			/// </summary>
			public OperateResult ExecCXJ_BCPHK_AddSub2(TN_WM_TASKEntity task, ConnectBitDto bit)
			{
			OperateResult re = OperateResult.Error("未知错误");

			try
			{
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});

			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			// 接驳位->立库
			TN_WM_TASKEntity taskEntity2 = new TN_WM_TASKEntity()
			{
			CN_S_TASK_NO = task.CN_S_TASK_NO + "_2",
			CN_S_TRAY_CODE = task.CN_S_TRAY_CODE,
			CN_S_STATE = Constants.TaskState_NoExecuted,
			CN_S_BF_TASK_NO = "",
			CN_S_AF_TASK_NO = "",
			CN_S_STOCK_CODE = task.CN_S_STOCK_CODE,
			CN_S_START_AREA = connectBit.CN_S_AREA_CODE,
			CN_S_START_BIT = connectBit.CN_S_LOCATION_CODE,
			CN_S_END_AREA = task.CN_S_END_AREA,
			CN_S_END_BIT = task.CN_S_END_BIT,
			CN_N_PRIORITY = 1,
			CN_S_CREATOR = "sys",
			CN_S_CREATOR_BY = "sys",
			CN_T_CREATE = DateTime.Now,
			CN_T_MODIFY = DateTime.Now,
			CN_S_REMARK = "",
			CN_S_TASK_FLAG = Constants.TaskFlag_ZG,
			CN_S_EXT1 = task.CN_S_TASK_NO,
			CN_S_EXT2 = TaskFlagConstants.CXJ_BCPHK_SUB_2,
			CN_S_EXT3 = ""
			};

			UseTransaction(trans =>
			{
			// 创建成型机-半成品回库子任务二
			re = CreateDapperDAL<TN_WM_TASKEntity>().Add(taskEntity2);
			if (!re.Success)
			throw new Exception(re.Msg);

			// 主任务状态置为执行中
			re = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task.CN_S_TASK_NO }, trans);
			if (!re.Success)
			throw new Exception(re.Msg);
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("创建成型机-半成品回库子任务二失败，任务编号=" + task.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}

			return re;
			}

			/// <summary>
			/// 执行成型机-半成品回库的第一条子任务
			/// </summary>
			/// <param name="task"></param>
			/// <param name=""></param>
			/// <returns></returns>
			public OperateResult ExecCXJ_BCPHK_Sub1(TN_WM_TASKEntity task1, ConnectBitDto bit)
			{
			OperateResult or = OperateResult.Error("未知错误");

			try
			{
			// 执行前检查货位状态
			// 接驳位
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});

			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			UseTransaction(trans =>
			{
			// 线边货位不管控

			// 接驳位预入库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_InLock
			}, new { CN_S_LOCATION_CODE = bit.bit }, trans);
			// 子任务一状态置为执行中
			or = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task1.CN_S_TASK_NO }, trans);
			// 发送Ams任务
			Log.Detail(LogType.LogPara("调用AMS接口执行任务"), "任务信息：" + JsonConvert.SerializeObject(task1));
			or = BLLCreator.Create<OtherSysApi>().SendAmsTask(task1);
			Log.Detail(LogType.LogPara("调用AMS接口执行任务"), "执行结果：" + JsonConvert.SerializeObject(or));
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("执行成型机-半成品回库子任务一失败，任务编号=" + task1.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}
			return or;
			}
			/// <summary>
			/// 执行成型机-半成品回库的第二条子任务
			/// </summary>
			/// <param name="task"></param>
			/// <param name="connectBit"></param>
			/// <returns></returns>
			public OperateResult ExecCXJ_BCPHK_Sub2(TN_WM_TASKEntity task2, ConnectBitDto bit)
			{
			OperateResult or = OperateResult.Error("未知错误");

			try
			{
			// 执行前检查货位状态
			// 接驳位
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});

			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			UseTransaction(trans =>
			{
			// 接驳位预出库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_OutLock
			}, new { CN_S_LOCATION_CODE = bit.bit }, trans);
			// 立库预入库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_InLock
			}, new { CN_S_LOCATION_CODE = task2.CN_S_END_BIT }, trans);

			// 子任务二状态置为执行中
			or = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task2.CN_S_TASK_NO }, trans);
			// 发送Wcs任务
			Log.Detail(LogType.LogPara("调用WCS接口执行任务"), "任务信息：" + JsonConvert.SerializeObject(task2));
			or = BLLCreator.Create<OtherSysApi>().SendWcsCreateTask(task2);
			Log.Detail(LogType.LogPara("调用WCS接口执行任务"), "执行结果：" + JsonConvert.SerializeObject(or));
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("执行成型机-半成品回库子任务二失败，任务编号=" + task2.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}
			return or;
			}

			#endregion

			#region 满托出库

			/// <summary>
			/// 创建满托出库并行子任务
			/// </summary>
			public OperateResult ExecCXJ_MTCK_Add(TN_WM_TASKEntity task, ConnectBitDto bit)
			{
			OperateResult re = OperateResult.Error("未知错误");

			try
			{
			// 接驳位
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});
			// 准备点
			var readyBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.readybit
			});
			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			if (readyBit == null)
			throw new Exception("未找到准备点货位：" + bit.readybit);
			if (readyBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("准备点货位：" + bit.readybit + "存在未执行完的任务");

			// 立库->接驳位
			TN_WM_TASKEntity taskEntity1 = new TN_WM_TASKEntity()
			{
			CN_S_TASK_NO = task.CN_S_TASK_NO + "_1",
			CN_S_TRAY_CODE = task.CN_S_TRAY_CODE,
			CN_S_STATE = Constants.TaskState_NoExecuted,
			CN_S_BF_TASK_NO = "",
			CN_S_AF_TASK_NO = "",
			CN_S_STOCK_CODE = task.CN_S_STOCK_CODE,
			CN_S_START_AREA = task.CN_S_START_AREA,
			CN_S_START_BIT = task.CN_S_START_BIT,
			CN_S_END_AREA = connectBit.CN_S_AREA_CODE,
			CN_S_END_BIT = connectBit.CN_S_LOCATION_CODE,
			CN_N_PRIORITY = 1,
			CN_S_CREATOR = "sys",
			CN_S_CREATOR_BY = "sys",
			CN_T_CREATE = DateTime.Now,
			CN_T_MODIFY = DateTime.Now,
			CN_S_REMARK = "",
			CN_S_TASK_FLAG = Constants.TaskFlag_ZG,
			CN_S_EXT1 = task.CN_S_TASK_NO,
			CN_S_EXT2 = TaskFlagConstants.CXJ_MTCK_SUB_1,
			CN_S_EXT3 = ""
			};
			// 准备点->线边
			TN_WM_TASKEntity taskEntity2 = new TN_WM_TASKEntity()
			{
			CN_S_TASK_NO = task.CN_S_TASK_NO + "_2",
			CN_S_TRAY_CODE = task.CN_S_TRAY_CODE,
			CN_S_STATE = Constants.TaskState_NoExecuted,
			CN_S_BF_TASK_NO = "",
			CN_S_AF_TASK_NO = "",
			CN_S_STOCK_CODE = task.CN_S_STOCK_CODE,
			CN_S_START_AREA = readyBit.CN_S_AREA_CODE,
			CN_S_START_BIT = readyBit.CN_S_LOCATION_CODE,
			CN_S_END_AREA = task.CN_S_END_AREA,
			CN_S_END_BIT = task.CN_S_END_BIT,
			CN_N_PRIORITY = 1,
			CN_S_CREATOR = "sys",
			CN_S_CREATOR_BY = "sys",
			CN_T_CREATE = DateTime.Now,
			CN_T_MODIFY = DateTime.Now,
			CN_S_REMARK = "",
			CN_S_TASK_FLAG = Constants.TaskFlag_ZG,
			CN_S_EXT1 = task.CN_S_TASK_NO,
			CN_S_EXT2 = TaskFlagConstants.CXJ_MTCK_SUB_2,
			CN_S_EXT3 = ""
			};

			UseTransaction(trans =>
			{
			// 创建成型机-满托出库子任务一
			re = CreateDapperDAL<TN_WM_TASKEntity>().Add(taskEntity1);
			if (!re.Success)
			throw new Exception(re.Msg);

			// 创建成型机-满托出库子任务二
			re = CreateDapperDAL<TN_WM_TASKEntity>().Add(taskEntity2);
			if (!re.Success)
			throw new Exception(re.Msg);

			// 主任务状态置为执行中记录接驳位
			re = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing,
			CN_S_CONNECT_BIT = bit.bit
			}, new { CN_S_TASK_NO = task.CN_S_TASK_NO }, trans);
			if (!re.Success)
			throw new Exception(re.Msg);
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("创建成型机-满托出库子任务失败，主任务编号=" + task.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}

			return re;
			}
			/// <summary>
			/// 执行满托出库的第一条子任务
			/// </summary>
			/// <param name="task"></param>
			/// <param name=""></param>
			/// <returns></returns>
			public OperateResult ExecCXJ_MTCK_Sub1(TN_WM_TASKEntity task1, ConnectBitDto bit)
			{
			OperateResult or = OperateResult.Error("未知错误");

			try
			{
			// 执行前检查货位状态
			// 接驳位
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});
			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			UseTransaction(trans =>
			{
			// 立库预出库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_OutLock
			}, new { CN_S_LOCATION_CODE = task1.CN_S_START_BIT }, trans);
			// 接驳位预入库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_InLock
			}, new { CN_S_LOCATION_CODE = bit.bit }, trans);
			// 子任务1状态置为执行中
			or = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task1.CN_S_TASK_NO }, trans);
			// 发送Wcs任务
			Log.Detail(LogType.LogPara("调用WCS接口执行任务"), "任务信息：" + JsonConvert.SerializeObject(task1));
			or = BLLCreator.Create<OtherSysApi>().SendWcsCreateTask(task1);
			Log.Detail(LogType.LogPara("调用WCS接口执行任务"), "执行结果：" + JsonConvert.SerializeObject(or));
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("执行成型机-满托出库子任务一失败，任务编号=" + task1.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}
			return or;
			}
			/// <summary>
			/// 执行满托出库的第二条子任务
			/// </summary>
			/// <param name="task"></param>
			/// <param name="connectBit"></param>
			/// <returns></returns>
			public OperateResult ExecCXJ_MTCK_Sub2(TN_WM_TASKEntity task2, ConnectBitDto bit)
			{
			OperateResult or = OperateResult.Error("未知错误");

			try
			{
			// 执行前检查货位状态
			// 接驳位的准备点货位
			var readyBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.readybit
			});
			if (readyBit == null)
			throw new Exception("未找到准备点货位：" + bit.readybit);
			if (readyBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("准备点货位：" + bit.readybit + "存在未执行完的任务");

			UseTransaction(trans =>
			{
			// 准备点预出库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_OutLock
			}, new { CN_S_LOCATION_CODE = bit.readybit }, trans);
			// 线边货位不管控

			// 子任务2状态置为执行中
			or = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task2.CN_S_TASK_NO }, trans);
			// 发送Ams任务
			Log.Detail(LogType.LogPara("调用AMS接口执行任务"), "任务信息：" + JsonConvert.SerializeObject(task2));
			or = BLLCreator.Create<OtherSysApi>().SendAmsTask(task2);
			Log.Detail(LogType.LogPara("调用AMS接口执行任务"), "执行结果：" + JsonConvert.SerializeObject(or));
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("执行成型机-满托出库子任务二失败，任务编号=" + task2.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}
			return or;
			}

			#endregion

			#region 回托回库-空托入库

			/// <summary>
			/// 创建成型机-空托回库-空托入库子任务一
			/// </summary>
			public OperateResult ExecCXJ_KTHK_KTRK_AddSub1(TN_WM_TASKEntity task, ConnectBitDto bit)
			{
			OperateResult re = OperateResult.Error("未知错误");

			try
			{
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});

			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			// 线边->接驳位
			TN_WM_TASKEntity taskEntity1 = new TN_WM_TASKEntity()
			{
			CN_S_TASK_NO = task.CN_S_TASK_NO + "_1",
			CN_S_TRAY_CODE = task.CN_S_TRAY_CODE,
			CN_S_STATE = Constants.TaskState_NoExecuted,
			CN_S_BF_TASK_NO = "",
			CN_S_AF_TASK_NO = "",
			CN_S_STOCK_CODE = task.CN_S_STOCK_CODE,
			CN_S_START_AREA = task.CN_S_START_AREA,
			CN_S_START_BIT = task.CN_S_START_BIT,
			CN_S_END_AREA = connectBit.CN_S_AREA_CODE,
			CN_S_END_BIT = connectBit.CN_S_LOCATION_CODE,
			CN_N_PRIORITY = 1,
			CN_S_CREATOR = "sys",
			CN_S_CREATOR_BY = "sys",
			CN_T_CREATE = DateTime.Now,
			CN_T_MODIFY = DateTime.Now,
			CN_S_REMARK = "",
			CN_S_TASK_FLAG = Constants.TaskFlag_ZG,
			CN_S_EXT1 = task.CN_S_TASK_NO,
			CN_S_EXT2 = TaskFlagConstants.CXJ_KTHK_KTRK_SUB_1,
			CN_S_EXT3 = ""
			};

			UseTransaction(trans =>
			{
			// 创建成型机-空托回库-空托入库子任务一
			re = CreateDapperDAL<TN_WM_TASKEntity>().Add(taskEntity1);
			if (!re.Success)
			throw new Exception(re.Msg);

			// 主任务状态置为执行中
			re = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task.CN_S_TASK_NO }, trans);
			if (!re.Success)
			throw new Exception(re.Msg);
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("创建成型机-空托回库-空托入库子任务一失败，任务编号=" + task.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}

			return re;
			}
			/// <summary>
			/// 创建成型机-空托回库-空托入库子任务二
			/// </summary>
			public OperateResult ExecCXJ_KTHK_KTRK_AddSub2(TN_WM_TASKEntity task, ConnectBitDto bit)
			{
			OperateResult re = OperateResult.Error("未知错误");

			try
			{
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});

			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			// 接驳位->立库
			TN_WM_TASKEntity taskEntity2 = new TN_WM_TASKEntity()
			{
			CN_S_TASK_NO = task.CN_S_TASK_NO + "_2",
			CN_S_TRAY_CODE = task.CN_S_TRAY_CODE,
			CN_S_STATE = Constants.TaskState_NoExecuted,
			CN_S_BF_TASK_NO = "",
			CN_S_AF_TASK_NO = "",
			CN_S_STOCK_CODE = task.CN_S_STOCK_CODE,
			CN_S_START_AREA = connectBit.CN_S_AREA_CODE,
			CN_S_START_BIT = connectBit.CN_S_LOCATION_CODE,
			CN_S_END_AREA = task.CN_S_END_AREA,
			CN_S_END_BIT = task.CN_S_END_BIT,
			CN_N_PRIORITY = 1,
			CN_S_CREATOR = "sys",
			CN_S_CREATOR_BY = "sys",
			CN_T_CREATE = DateTime.Now,
			CN_T_MODIFY = DateTime.Now,
			CN_S_REMARK = "",
			CN_S_TASK_FLAG = Constants.TaskFlag_ZG,
			CN_S_EXT1 = task.CN_S_TASK_NO,
			CN_S_EXT2 = TaskFlagConstants.CXJ_KTHK_KTRK_SUB_2,
			CN_S_EXT3 = ""
			};

			UseTransaction(trans =>
			{
			// 创建成型机-空托回库-空托入库子任务二
			re = CreateDapperDAL<TN_WM_TASKEntity>().Add(taskEntity2);
			if (!re.Success)
			throw new Exception(re.Msg);

			// 主任务状态置为执行中
			re = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task.CN_S_TASK_NO }, trans);
			if (!re.Success)
			throw new Exception(re.Msg);
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("创建成型机-空托回库-空托入库子任务二失败，任务编号=" + task.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}

			return re;
			}

			/// <summary>
			/// 执行成型机-空托回库-空托入库的第一条子任务
			/// </summary>
			/// <param name="task"></param>
			/// <param name=""></param>
			/// <returns></returns>
			public OperateResult ExecCXJ_KTHK_KTRK_Sub1(TN_WM_TASKEntity task1, ConnectBitDto bit)
			{
			OperateResult or = OperateResult.Error("未知错误");

			try
			{
			// 执行前检查货位状态
			// 接驳位
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});

			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			UseTransaction(trans =>
			{
			// 线边货位不管控

			// 接驳位预入库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_InLock
			}, new { CN_S_LOCATION_CODE = bit.bit }, trans);
			// 子任务一状态置为执行中
			or = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task1.CN_S_TASK_NO }, trans);
			// 发送Ams任务
			Log.Detail(LogType.LogPara("调用AMS接口执行任务"), "任务信息：" + JsonConvert.SerializeObject(task1));
			or = BLLCreator.Create<OtherSysApi>().SendAmsTask(task1);
			Log.Detail(LogType.LogPara("调用AMS接口执行任务"), "执行结果：" + JsonConvert.SerializeObject(or));
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("执行成型机-空托回库-空托入库子任务一失败，任务编号=" + task1.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}
			return or;
			}
			/// <summary>
			/// 执行成型机-空托回库-空托入库的第二条子任务
			/// </summary>
			/// <param name="task"></param>
			/// <param name="connectBit"></param>
			/// <returns></returns>
			public OperateResult ExecCXJ_KTHK_KTRK_Sub2(TN_WM_TASKEntity task2, ConnectBitDto bit)
			{
			OperateResult or = OperateResult.Error("未知错误");

			try
			{
			// 执行前检查货位状态
			// 接驳位
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});

			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			UseTransaction(trans =>
			{
			// 接驳位预出库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_OutLock
			}, new { CN_S_LOCATION_CODE = bit.bit }, trans);
			// 立库预入库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_InLock
			}, new { CN_S_LOCATION_CODE = task2.CN_S_END_BIT }, trans);

			// 子任务二状态置为执行中
			or = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task2.CN_S_TASK_NO }, trans);
			// 发送Wcs任务
			Log.Detail(LogType.LogPara("调用WCS接口执行任务"), "任务信息：" + JsonConvert.SerializeObject(task2));
			or = BLLCreator.Create<OtherSysApi>().SendWcsCreateTask(task2);
			Log.Detail(LogType.LogPara("调用WCS接口执行任务"), "执行结果：" + JsonConvert.SerializeObject(or));
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("执行成型机-空托回库-空托入库子任务二失败，任务编号=" + task2.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}
			return or;
			}

			#endregion

			#endregion

			#region 带束

			#region 半成品及空托回库

			/// <summary>
			/// 创建成型机带束-半成品/空托回库子任务一
			/// </summary>
			public OperateResult ExecDS_BCPKTHK_AddSub1(TN_WM_TASKEntity task, ConnectBitDto bit)
			{
			OperateResult re = OperateResult.Error("未知错误");

			try
			{
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});

			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			// 线边->接驳位
			TN_WM_TASKEntity taskEntity1 = new TN_WM_TASKEntity()
			{
			CN_S_TASK_NO = task.CN_S_TASK_NO + "_1",
			CN_S_TRAY_CODE = task.CN_S_TRAY_CODE,
			CN_S_STATE = Constants.TaskState_NoExecuted,
			CN_S_BF_TASK_NO = "",
			CN_S_AF_TASK_NO = "",
			CN_S_STOCK_CODE = task.CN_S_STOCK_CODE,
			CN_S_START_AREA = task.CN_S_START_AREA,
			CN_S_START_BIT = task.CN_S_START_BIT,
			CN_S_END_AREA = connectBit.CN_S_AREA_CODE,
			CN_S_END_BIT = connectBit.CN_S_LOCATION_CODE,
			CN_N_PRIORITY = 1,
			CN_S_CREATOR = "sys",
			CN_S_CREATOR_BY = "sys",
			CN_T_CREATE = DateTime.Now,
			CN_T_MODIFY = DateTime.Now,
			CN_S_REMARK = "",
			CN_S_TASK_FLAG = Constants.TaskFlag_ZG,
			CN_S_EXT1 = task.CN_S_TASK_NO,
			CN_S_EXT2 = TaskFlagConstants.DS_BCPKTHK_SUB_1,
			CN_S_EXT3 = ""
			};

			UseTransaction(trans =>
			{
			// 创建成型机带束-半成品/空托回库-子任务一
			re = CreateDapperDAL<TN_WM_TASKEntity>().Add(taskEntity1);
			if (!re.Success)
			throw new Exception(re.Msg);

			// 主任务状态置为执行中
			re = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task.CN_S_TASK_NO }, trans);
			if (!re.Success)
			throw new Exception(re.Msg);
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("创建成型机带束-半成品/空托回库子任务一失败，任务编号=" + task.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}

			return re;
			}
			/// <summary>
			/// 创建成型机带束-半成品/空托回库子任务二
			/// </summary>
			public OperateResult ExecDS_BCPKTHK_AddSub2(TN_WM_TASKEntity task, ConnectBitDto bit)
			{
			OperateResult re = OperateResult.Error("未知错误");

			try
			{
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});

			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			// 接驳位->立库
			TN_WM_TASKEntity taskEntity2 = new TN_WM_TASKEntity()
			{
			CN_S_TASK_NO = task.CN_S_TASK_NO + "_2",
			CN_S_TRAY_CODE = task.CN_S_TRAY_CODE,
			CN_S_STATE = Constants.TaskState_NoExecuted,
			CN_S_BF_TASK_NO = "",
			CN_S_AF_TASK_NO = "",
			CN_S_STOCK_CODE = task.CN_S_STOCK_CODE,
			CN_S_START_AREA = connectBit.CN_S_AREA_CODE,
			CN_S_START_BIT = connectBit.CN_S_LOCATION_CODE,
			CN_S_END_AREA = task.CN_S_END_AREA,
			CN_S_END_BIT = task.CN_S_END_BIT,
			CN_N_PRIORITY = 1,
			CN_S_CREATOR = "sys",
			CN_S_CREATOR_BY = "sys",
			CN_T_CREATE = DateTime.Now,
			CN_T_MODIFY = DateTime.Now,
			CN_S_REMARK = "",
			CN_S_TASK_FLAG = Constants.TaskFlag_ZG,
			CN_S_EXT1 = task.CN_S_TASK_NO,
			CN_S_EXT2 = TaskFlagConstants.DS_BCPKTHK_SUB_2,
			CN_S_EXT3 = ""
			};

			UseTransaction(trans =>
			{
			// 创建成型机带束-半成品/空托回库子任务二
			re = CreateDapperDAL<TN_WM_TASKEntity>().Add(taskEntity2);
			if (!re.Success)
			throw new Exception(re.Msg);

			// 主任务状态置为执行中
			re = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task.CN_S_TASK_NO }, trans);
			if (!re.Success)
			throw new Exception(re.Msg);
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("创建成型机带束-半成品/空托回库子任务二失败，任务编号=" + task.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}

			return re;
			}

			/// <summary>
			/// 执行成型机带束-半成品/空托回库的第一条子任务
			/// </summary>
			/// <param name="task"></param>
			/// <param name=""></param>
			/// <returns></returns>
			public OperateResult ExecDS_BCPKTHK_Sub1(TN_WM_TASKEntity task1, ConnectBitDto bit)
			{
			OperateResult or = OperateResult.Error("未知错误");

			try
			{
			// 执行前检查货位状态
			// 接驳位
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});

			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			UseTransaction(trans =>
			{
			// 线边货位不管控

			// 接驳位预入库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_InLock
			}, new { CN_S_LOCATION_CODE = bit.bit }, trans);
			// 子任务一状态置为执行中
			or = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task1.CN_S_TASK_NO }, trans);
			// 发送Ams任务
			Log.Detail(LogType.LogPara("调用AMS接口执行任务"), "任务信息：" + JsonConvert.SerializeObject(task1));
			or = BLLCreator.Create<OtherSysApi>().SendAmsTask(task1);
			Log.Detail(LogType.LogPara("调用AMS接口执行任务"), "执行结果：" + JsonConvert.SerializeObject(or));
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("执行成型机带束-半成品/空托回库子任务一失败，任务编号=" + task1.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}
			return or;
			}
			/// <summary>
			/// 执行成型机带束-半成品/空托回库的第二条子任务
			/// </summary>
			/// <param name="task"></param>
			/// <param name="connectBit"></param>
			/// <returns></returns>
			public OperateResult ExecDS_BCPKTHK_Sub2(TN_WM_TASKEntity task2, ConnectBitDto bit)
			{
			OperateResult or = OperateResult.Error("未知错误");

			try
			{
			// 执行前检查货位状态
			// 接驳位
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});

			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			UseTransaction(trans =>
			{
			// 接驳位预出库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_OutLock
			}, new { CN_S_LOCATION_CODE = bit.bit }, trans);
			// 立库预入库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_InLock
			}, new { CN_S_LOCATION_CODE = task2.CN_S_END_BIT }, trans);

			// 子任务二状态置为执行中
			or = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task2.CN_S_TASK_NO }, trans);
			// 发送Wcs任务
			Log.Detail(LogType.LogPara("调用WCS接口执行任务"), "任务信息：" + JsonConvert.SerializeObject(task2));
			or = BLLCreator.Create<OtherSysApi>().SendWcsCreateTask(task2);
			Log.Detail(LogType.LogPara("调用WCS接口执行任务"), "执行结果：" + JsonConvert.SerializeObject(or));
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("执行成型机带束-半成品/空托回库子任务二失败，任务编号=" + task2.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}
			return or;
			}

			#endregion

			#region 满托出库

			/// <summary>
			/// 创建满托出库并行子任务
			/// </summary>
			public OperateResult ExecDS_MTCK_Add(TN_WM_TASKEntity task, ConnectBitDto bit)
			{
			OperateResult re = OperateResult.Error("未知错误");

			try
			{
			// 接驳位
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});
			// 准备点
			var readyBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.readybit
			});
			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			if (readyBit == null)
			throw new Exception("未找到准备点货位：" + bit.readybit);
			if (readyBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("准备点货位：" + bit.readybit + "存在未执行完的任务");

			// 立库->接驳位
			TN_WM_TASKEntity taskEntity1 = new TN_WM_TASKEntity()
			{
			CN_S_TASK_NO = task.CN_S_TASK_NO + "_1",
			CN_S_TRAY_CODE = task.CN_S_TRAY_CODE,
			CN_S_STATE = Constants.TaskState_NoExecuted,
			CN_S_BF_TASK_NO = "",
			CN_S_AF_TASK_NO = "",
			CN_S_STOCK_CODE = task.CN_S_STOCK_CODE,
			CN_S_START_AREA = task.CN_S_START_AREA,
			CN_S_START_BIT = task.CN_S_START_BIT,
			CN_S_END_AREA = connectBit.CN_S_AREA_CODE,
			CN_S_END_BIT = connectBit.CN_S_LOCATION_CODE,
			CN_N_PRIORITY = 1,
			CN_S_CREATOR = "sys",
			CN_S_CREATOR_BY = "sys",
			CN_T_CREATE = DateTime.Now,
			CN_T_MODIFY = DateTime.Now,
			CN_S_REMARK = "",
			CN_S_TASK_FLAG = Constants.TaskFlag_ZG,
			CN_S_EXT1 = task.CN_S_TASK_NO,
			CN_S_EXT2 = TaskFlagConstants.DS_MTCK_SUB_1,
			CN_S_EXT3 = ""
			};
			// 准备点->线边
			TN_WM_TASKEntity taskEntity2 = new TN_WM_TASKEntity()
			{
			CN_S_TASK_NO = task.CN_S_TASK_NO + "_2",
			CN_S_TRAY_CODE = task.CN_S_TRAY_CODE,
			CN_S_STATE = Constants.TaskState_NoExecuted,
			CN_S_BF_TASK_NO = "",
			CN_S_AF_TASK_NO = "",
			CN_S_STOCK_CODE = task.CN_S_STOCK_CODE,
			CN_S_START_AREA = readyBit.CN_S_AREA_CODE,
			CN_S_START_BIT = readyBit.CN_S_LOCATION_CODE,
			CN_S_END_AREA = task.CN_S_END_AREA,
			CN_S_END_BIT = task.CN_S_END_BIT,
			CN_N_PRIORITY = 1,
			CN_S_CREATOR = "sys",
			CN_S_CREATOR_BY = "sys",
			CN_T_CREATE = DateTime.Now,
			CN_T_MODIFY = DateTime.Now,
			CN_S_REMARK = "",
			CN_S_TASK_FLAG = Constants.TaskFlag_ZG,
			CN_S_EXT1 = task.CN_S_TASK_NO,
			CN_S_EXT2 = TaskFlagConstants.DS_MTCK_SUB_2,
			CN_S_EXT3 = ""
			};

			UseTransaction(trans =>
			{
			// 创建成型机带束-满托出库子任务一
			re = CreateDapperDAL<TN_WM_TASKEntity>().Add(taskEntity1);
			if (!re.Success)
			throw new Exception(re.Msg);

			// 创建成型机带束-满托出库子任务二
			re = CreateDapperDAL<TN_WM_TASKEntity>().Add(taskEntity2);
			if (!re.Success)
			throw new Exception(re.Msg);

			// 主任务状态置为执行中记录接驳位
			re = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing,
			CN_S_CONNECT_BIT = bit.bit
			}, new { CN_S_TASK_NO = task.CN_S_TASK_NO }, trans);
			if (!re.Success)
			throw new Exception(re.Msg);
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("创建成型机带束-满托出库子任务失败，主任务编号=" + task.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}

			return re;
			}
			/// <summary>
			/// 执行满托出库的第一条子任务
			/// </summary>
			/// <param name="task"></param>
			/// <param name=""></param>
			/// <returns></returns>
			public OperateResult ExecDS_MTCK_Sub1(TN_WM_TASKEntity task1, ConnectBitDto bit)
			{
			OperateResult or = OperateResult.Error("未知错误");

			try
			{
			// 执行前检查货位状态
			// 接驳位
			var connectBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.bit
			});
			if (connectBit == null)
			throw new Exception("未找到接驳位货位：" + bit.bit);
			if (connectBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("接驳位：" + bit.bit + "存在未执行完的任务");

			UseTransaction(trans =>
			{
			// 立库预出库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_OutLock
			}, new { CN_S_LOCATION_CODE = task1.CN_S_START_BIT }, trans);
			// 接驳位预入库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_InLock
			}, new { CN_S_LOCATION_CODE = bit.bit }, trans);
			// 子任务1状态置为执行中
			or = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task1.CN_S_TASK_NO }, trans);
			// 发送Wcs任务
			Log.Detail(LogType.LogPara("调用WCS接口执行任务"), "任务信息：" + JsonConvert.SerializeObject(task1));
			or = BLLCreator.Create<OtherSysApi>().SendWcsCreateTask(task1);
			Log.Detail(LogType.LogPara("调用WCS接口执行任务"), "执行结果：" + JsonConvert.SerializeObject(or));
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("执行成型机带束-满托出库子任务一失败，任务编号=" + task1.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}
			return or;
			}
			/// <summary>
			/// 执行满托出库的第二条子任务
			/// </summary>
			/// <param name="task"></param>
			/// <param name="connectBit"></param>
			/// <returns></returns>
			public OperateResult ExecDS_MTCK_Sub2(TN_WM_TASKEntity task2, ConnectBitDto bit)
			{
			OperateResult or = OperateResult.Error("未知错误");

			try
			{
			// 执行前检查货位状态
			// 接驳位的准备点货位
			var readyBit = BLLCreator.CreateDapper<TN_WM_LOCATION_EXTEntity>().GetSingleEntity(new
			{
			CN_S_LOCATION_CODE = bit.readybit
			});
			if (readyBit == null)
			throw new Exception("未找到准备点货位：" + bit.readybit);
			if (readyBit.CN_S_LOCATION_STATE != Constants.Location_State_Normal)
			throw new Exception("准备点货位：" + bit.readybit + "存在未执行完的任务");

			UseTransaction(trans =>
			{
			// 准备点预出库锁定
			CreateDapperDAL<TN_WM_LOCATION_EXTEntity>().Update(new
			{
			CN_S_LOCATION_STATE = Constants.Location_State_OutLock
			}, new { CN_S_LOCATION_CODE = bit.readybit }, trans);
			// 线边货位不管控

			// 子任务2状态置为执行中
			or = CreateDapperDAL<TN_WM_TASKEntity>().Update(new
			{
			CN_S_STATE = Constants.TaskState_Executing
			}, new { CN_S_TASK_NO = task2.CN_S_TASK_NO }, trans);
			// 发送Ams任务
			Log.Detail(LogType.LogPara("调用AMS接口执行任务"), "任务信息：" + JsonConvert.SerializeObject(task2));
			or = BLLCreator.Create<OtherSysApi>().SendAmsTask(task2);
			Log.Detail(LogType.LogPara("调用AMS接口执行任务"), "执行结果：" + JsonConvert.SerializeObject(or));
			});
			}
			catch (Exception ex)
			{
			OperateResult.Error("执行成型机带束-满托出库子任务二失败，任务编号=" + task2.CN_S_TASK_NO + "，错误信息：" + ex.Message);
			}
			return or;
			}

			#endregion

			#endregion
			}

			/// <summary>
			@@ -2871,37 +1200,6 @@
			/// 空托入库
			/// </summary>
			public static string KTRK = "空托入库";
			}

			/// <summary>
			/// 接口同步的业务类型定义
			/// </summary>
			public class BusinessTypeConstants
			{
			/// <summary>
			/// 半成品满托入库
			/// </summary>
			public static string BCP_MTRK = "1";
			/// <summary>
			/// 成型机半成品回库
			/// </summary>
			public static string CXJ_BCPHK = "2";
			/// <summary>
			/// 成型机空桶回库
			/// </summary>
			public static string CXJ_KTHK = "3";
			/// <summary>
			/// 成型机满托出库
			/// </summary>
			public static string CXJ_MTCK = "4";
			/// <summary>
			/// 成型机带束回库
			/// </summary>
			public static string CXJ_DSHK = "5";
			/// <summary>
			/// 成型机带束满托出库
			/// </summary>
			public static string CXJ_DSMTCK = "6";
			}

			/// <summary>
			@@ -2959,92 +1257,6 @@
			/// 带束-满托出库
			/// </summary>
			public static string DS_MTCK = "成型机带束-满托出库";

			#endregion
			}

			/// <summary>
			/// 任务标识常量
			/// </summary>
			public class TaskFlagConstants
			{
			/// <summary>
			/// 主任务
			/// </summary>
			public static string ROOT = "主任务";

			#region 半成品

			/// <summary>
			/// 半成品-空托出库子任务一
			/// </summary>
			public static string BCP_KTCK_SUB_1 = "半成品-空托出库-子任务一";
			/// <summary>
			/// 半成品-空托出库子任务二
			/// </summary>
			public static string BCP_KTCK_SUB_2 = "半成品-空托出库-子任务二";
			/// <summary>
			/// 半成品-满托入库子任务一
			/// </summary>
			public static string BCP_MTRK_SUB_1 = "半成品-满托入库-子任务一";
			/// <summary>
			/// 半成品-满托入库子任务二
			/// </summary>
			public static string BCP_MTRK_SUB_2 = "半成品-满托入库-子任务二";

			#endregion

			#region 成型机

			/// <summary>
			/// 成型机-半成品回库-子任务一
			/// </summary>
			public static string CXJ_BCPHK_SUB_1 = "成型机-半成品回库-子任务一";
			/// <summary>
			/// 成型机-半成品回库-子任务二
			/// </summary>
			public static string CXJ_BCPHK_SUB_2 = "成型机-半成品回库-子任务一";
			/// <summary>
			/// 成型机-空托回库-记录任务
			/// </summary>
			public static string CXJ_KTHK_RECORD = "成型机-空托回库-记录任务";
			/// <summary>
			/// 成型机-空托回库-入库阶段-子任务一
			/// </summary>
			public static string CXJ_KTHK_KTRK_SUB_1 = "成型机-空托回库-入库阶段-子任务一";
			/// <summary>
			/// 成型机-空托回库-入库阶段-子任务二
			/// </summary>
			public static string CXJ_KTHK_KTRK_SUB_2 = "成型机-空托回库-入库阶段-子任务二";
			/// <summary>
			/// 成型机-满托出库-子任务一
			/// </summary>
			public static string CXJ_MTCK_SUB_1 = "成型机-满托出库-子任务一";
			/// <summary>
			/// 成型机-满托出库-子任务二
			/// </summary>
			public static string CXJ_MTCK_SUB_2 = "成型机-满托出库-子任务二";

			#endregion

			#region 带束

			/// <summary>
			/// 成型机带束-半成品/空托回库-子任务一
			/// </summary>
			public static string DS_BCPKTHK_SUB_1 = "成型机带束-半成品/空托回库-子任务一";
			/// <summary>
			/// 成型机带束-半成品/空托回库-子任务二
			/// </summary>
			public static string DS_BCPKTHK_SUB_2 = "成型机带束-半成品/空托回库-子任务二";
			/// <summary>
			/// 成型机带束-满托出库-子任务一
			/// </summary>
			public static string DS_MTCK_SUB_1 = "成型机带束-满托出库-子任务一";
			/// <summary>
			/// 成型机带束-满托出库-子任务二
			/// </summary>
			public static string DS_MTCK_SUB_2 = "成型机带束-满托出库-子任务二";

			#endregion
			}