--[[
 编码: GK-API-04
 名称: GK-WMS-Receipt_Sync 
 作者: 袁峰
 入口函数：Receipt_Sync 
 功能说明: 接收上游系统的XML数据，创建收货单主表（Receipt_Order）和明细记录（Receipt_Detail）。
 输入参数: xmlData（XML格式的字符串）
 返回参数: xml 格式的响应报文：
 形如：
 <response>
    <message>收货单已存在</message>
    <code>204</code>
    <flag>failure</flag>
    <error>收货单[SO2025050701]已存在</error>
 </response>
 
 调用示例: Receipt_Sync(xmlData)
 注意事项: 1. 输入参数xmlData为XML格式的字符串，包含了收货单主表和明细记录的数据。
          2. 函数会解析XML数据，并将其插入到数据库中。
          3. 允许xml 传入1条或者多条收货单主表数据，每条收货单主表数据可以包含多条收货单明细数据。

 变更历史: 2025-05-14 优化返回结果处理
 
 XML 报文示例如下；
<soapenv:Envelope
    xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Header
        xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    </soap:Header>
    <soapenv:Body>
        <v1:InSmallPieceReq
            xmlns:v1="http://www.gkht.com/InReceive/INV/Ebs/Schemas/InSmallPiece/V1.0">
            <v1:SmallPiece_Input>
                <v1:RESTHeader>
                    <v1:Responsibility/>
                    <v1:RespApplication/>
                    <v1:SecurityGroup/>
                    <v1:NLSLanguage>SIMPLIFIED CHINESE</v1:NLSLanguage>
                    <v1:Org_Id>0</v1:Org_Id>
                </v1:RESTHeader>
                <v1:InputParameters>
                        <!--1 or more repetitions:-->
                       <v1:SmallPiece_TB>
                           <v1:orderNo>SO2025050601</v1:orderNo>
                           <v1:asnNo>KPD00001</v1:asnNo>
                           <v1:storerId>CGKHTY</v1:storerId>
                           <v1:ownerId>CGKHTY</v1:ownerId>
                           <v1:orderDate>2025-05-06</v1:orderDate>
				            	    <v1:priority>0</v1:priority>
					     		<v1:memo></v1:memo>
				        		<v1:SmallPiece_TB_ITEM>
                            <v1:orderItemId>1</v1:orderItemId>
                            <v1:skuId>XR33201-2L080B</v1:skuId>
                            <v1:skuStatus>AVL</v1:skuStatus>
                            <v1:qty>2</v1:qty>
					    			<v1:batchNo>PHI00000000000001309</v1:batchNo>
                            <v1:produceCode>YL201125</v1:produceCode>
					    			<v1:productDate>2016-04-23</v1:productDate>
					    			<v1:expiryDate>2099-12-31</v1:expiryDate>
					    			<v1:registerNo>国食药监械（准)字2012</v1:registerNo>
                        </v1:SmallPiece_TB_ITEM>
					     	<v1:SmallPiece_TB_ITEM>
                            <v1:orderItemId>2</v1:orderItemId>
                            <v1:skuId>KH32803017</v1:skuId>
                            <v1:skuStatus>AVL</v1:skuStatus>
                            <v1:qty>5</v1:qty>
					      		<v1:batchNo>PHI00000000000001308</v1:batchNo>
                            <v1:produceCode>YL2011256</v1:produceCode>
					     		<v1:productDate>2023-04-23</v1:productDate>
					     		<v1:expiryDate>2099-12-31</v1:expiryDate>
					      		<v1:registerNo></v1:registerNo>
                        </v1:SmallPiece_TB_ITEM>
                    </v1:SmallPiece_TB>
                </v1:InputParameters>
            </v1:SmallPiece_Input>
        </v1:InSmallPieceReq>
    </soapenv:Body>
</soapenv:Envelope>
--]] wms_base = require("wms_base")
xml = require("oi_base_xml")
mobox = require("OILua_JavelinExt")
m3 = require("oi_base_mobox")
function Create_result(flag, code, msg)
    return {
        flag = flag or "success",
        code = code or "0",
        message = msg or ""
    }
end
function Receipt_Sync(strLuaDEID)
    -- 初始化最终结果
    local FinalRes = Create_result()
    -- 1. 获取 xml 数据包
    local nRet, soap_xml = mobox.getCurEditDataPacket(strLuaDEID)
    if nRet ~= 0 then
        FinalRes = Create_result("failure", "201", "无法获取数据包: " .. soap_xml)
        local xml_result = xml.json_to_xml(FinalRes, "response")
        mobox.returnValue(strLuaDEID, 0, xml_result, 0)
        lua.Stop(strLuaDEID, "获取数据包失败", soap_xml)
        return
    end

    lua.DebugEx(strLuaDEID, "获取到的数据包", soap_xml)

    -- 2. 解析 xml
    local nRet, parsed_data = xml.parse(soap_xml)
    if nRet ~= 0 then
        FinalRes = Create_result("failure", "202", "xml 格式非法" .. parsed_data)
        local xml_result = xml.json_to_xml(FinalRes, "response")
        mobox.returnValue(strLuaDEID, 0, xml_result, 0)
        lua.Stop(strLuaDEID, "xml格式非法", parsed_data)
        return
    end

    -- 3. 提取主表数据
    local receipt_data = parsed_data.Envelope.Body.InSmallPieceReq.SmallPiece_Input
    local input_params = receipt_data.InputParameters

    -- 检查是否存在 SmallPiece_TB
    if not input_params or not input_params.SmallPiece_TB then
        FinalRes = Create_result("failure", "203", "xml 数据格式错误，缺少 SmallPiece_TB")
        local xml_result = xml.json_to_xml(FinalRes, "response")
        mobox.returnValue(strLuaDEID, 0, xml_result, 0)
        lua.Stop(strLuaDEID, "xml 数据格式错误", xml_result)
        return
    end

    -- 4. 统一处理：确保 receipt_headers 是数组（即使只有一个主表）
    local receipt_headers = input_params.SmallPiece_TB
    if receipt_headers[1] == nil then
        receipt_headers = {receipt_headers}
    end

    -- 5. 获取系统常量
    local RetWH_COE, CONST_WH = wms_base.Get_sConst2("GK_Default_Warehouse")
    local RetFAC_COE, CONST_FACTORY = wms_base.Get_sConst2("GK_Default_Factory")

    -- 仓库常量异常捕获
    if (RetWH_COE ~= 0) then
        FinalRes = Create_result("failure", "204", "获取仓库常量失败" .. CONST_WH)
        local xml_result = xml.json_to_xml(FinalRes, "response")
        mobox.returnValue(strLuaDEID, 0, xml_result, 0)
        lua.Stop(strLuaDEID, "获取系统常量：GK_Default_Warehouse 失败", xml_result)
        return
    end

    -- 工厂常量异常捕获
    if (RetFAC_COE ~= 0) then
        FinalRes = Create_result("failure", "204", "获取工厂常量失败" .. CONST_FACTORY)
        local xml_result = xml.json_to_xml(FinalRes, "response")
        mobox.returnValue(strLuaDEID, 0, xml_result, 0)
        lua.Stop(strLuaDEID, "获取系统常量：GK_Default_Factory失败", xml_result)
        return
    end
    -- 6. 遍历所有收货单
    for i = 1, #receipt_headers do
        local header = receipt_headers[i]
        -- 检查收货单是否已存在
        local strCondition = string.format("S_NO = '%s'", header.orderNo)
        lua.DebugEx(strLuaDEID, "查询收货单条件", strCondition)
        local nRet, retReceipt = m3.GetDataObjByCondition(strLuaDEID, "Receipt_Order", strCondition)

        if nRet == 0 then
            -- 查询成功且找到记录，说明收货单已存在
            lua.DebugEx(strLuaDEID, "查询成功，收货单已存在", retReceipt)
            FinalRes = Create_result("failure", "1", "收货单[" .. header.orderNo .. "]已存在")
            local xml_result = xml.json_to_xml(FinalRes, "response")
            mobox.returnValue(strLuaDEID, 0, xml_result, 0)
            lua.Stop(strLuaDEID, "收货单已存在", retReceipt)
            return
        elseif nRet ~= 1 then
            -- 查询出错
            lua.DebugEx(strLuaDEID, "查询出错", retReceipt)
            FinalRes = Create_result("failure", "206",
                "检查收货单[" .. header.orderNo .. "]时出错: " .. retReceipt)
            local xml_result = xml.json_to_xml(FinalRes, "response")
            mobox.returnValue(strLuaDEID, 0, xml_result, 0)
            lua.Stop(strLuaDEID, "检查收货单是否存在时出错", xml_result)
            return
        end

        -- 创建主表数据
        local receipt = m3.AllocObject(strLuaDEID, "Receipt_Order")
        receipt.no = header.orderNo
        receipt.asn_no = header.asnNo
        receipt.op_date = header.orderDate
        receipt.priority = header.priority
        receipt.note = header.memo or ""
        receipt.bs_type = "SMALL_PIECE"
        receipt.factory = CONST_FACTORY
        receipt.wh_code = CONST_WH

        -- 检查是否已存在相同关键字的记录
        local nRet, ret_info = m3.CreateDataObj(strLuaDEID, receipt)
        if nRet ~= 0 then
            -- 再次检查是否真的存在
            local nRetCheck, retReceiptCheck = m3.GetDataObjByCondition(strLuaDEID, "Receipt_Order", strCondition)
            if nRetCheck == 0 then
                FinalRes = Create_result("failure", "205", "收货单[" .. header.orderNo .. "]已存在")
            else
                FinalRes = Create_result("failure", "207",
                    "收货单[" .. header.orderNo .. "]创建失败: " .. ret_info)
            end
            local xml_result = xml.json_to_xml(FinalRes, "response")
            mobox.returnValue(strLuaDEID, 0, xml_result, 0)
            lua.Stop(strLuaDEID, "创建收货单主表失败", ret_info)
            return
        end

        -- 检查明细数据是否存在
        if header.SmallPiece_TB_ITEM == nil then
            lua.DebugEx(strLuaDEID, "警告：收货单 " .. header.orderNo .. " 无明细数据")
            FinalRes = Create_result("failure", "208", "收货单[" .. header.orderNo .. "]无明细数据")
            local xml_result = xml.json_to_xml(FinalRes, "response")
            mobox.returnValue(strLuaDEID, 0, xml_result, 0)
            lua.Stop(strLuaDEID, "收货单无明细数据", xml_result)
            return
        end

        -- 7. 遍历当前收货单的所有明细数据
        local details = header.SmallPiece_TB_ITEM
        -- 确保 details 是数组（即使只有一个明细）
        if details[1] == nil then
            details = {details}
        end

        for j = 1, #details do
            local item = details[j]
            -- 先检验skuId是否存在
            local strCondition = string.format("S_ITEM_CODE= '%s' AND S_STORER = '%s'", item.skuId, header.storerId)
            -- 执行查询
            local nRet, receiptInfo = m3.GetDataObjByCondition(strLuaDEID, "SKU", strCondition)
            if (nRet ~= 0) then
                lua.DebugEx(strLuaDEID, "SKU查询出错",
                    "ITEM_CODE: " .. item.skuId .. ", 错误信息: " .. receiptInfo)
                FinalRes = Create_result("failure", "207",
                "检查 SKU 是否存在时出错:SKU ID为 " .. item.skuId .. ", 错误: " .. receiptInfo)
                local xml_result = xml.json_to_xml(FinalRes, "response")
                mobox.returnValue(strLuaDEID, 0, xml_result, 0)
                lua.Stop(strLuaDEID, "查询失败", xml_result)
                return
            elseif (receiptInfo == "") then
                lua.DebugEx(strLuaDEID, "查询为空", "ITEM_CODE:" .. item.skuId)
                FinalRes = Create_result("failure", "208", "查询数据为空：ITEM_CODE : " .. item.skuId)
                local xml_result = xml.json_to_xml(FinalRes, "response")
                mobox.returnValue(strLuaDEID, 0, xml_result, 0)
                lua.Stop(strLuaDEID, "物料数据不存在", xml_result)
                return
            end

            -- 创建明细数据
            local receipt_detail = m3.AllocObject(strLuaDEID, "Receipt_Detail")
            receipt_detail.row_no = item.orderItemId
            receipt_detail.receipt_no = header.orderNo
            receipt_detail.qty = lua.Get_NumAttrValue(item.qty) or 0
            receipt_detail.acc_put_qty = lua.Get_NumAttrValue("0")
            receipt_detail.acc_unq_qty = lua.Get_NumAttrValue("0")
            receipt_detail.acc_c_qty = lua.Get_NumAttrValue("0")
            receipt_detail.item_code = item.skuId
            receipt_detail.item_state = item.skuStatus
            receipt_detail.item_name = receiptInfo.item_name or ""
            receipt_detail.wu = "kg"
            receipt_detail.batch_no = item.produceCode
            receipt_detail.prd_date = item.productDate
            receipt_detail.exp_date = item.expiryDate
            receipt_detail.udf01 = item.registerNo
            receipt_detail.storer = header.storerId
            receipt_detail.owner = header.ownerId
            receipt_detail.item_name = receiptInfo.item_name or ""
            receipt_detail.net_weight = receiptInfo.weight or 0
            receipt_detail.gross_weight = receiptInfo.weight or 0
            receipt_detail.uom = receiptInfo.uom or ""

            lua.DebugEx(strLuaDEID, "创建明细数据:", receipt_detail)
            local nRet, ret_info = m3.CreateDataObj(strLuaDEID, receipt_detail)
            if nRet ~= 0 then
                FinalRes = Create_result("failure", "208", "创建收货明细失败: " .. ret_info)
                local xml_result = xml.json_to_xml(FinalRes, "response")
                mobox.returnValue(strLuaDEID, 0, xml_result, 0)
                lua.DebugEx(strLuaDEID, "创建收货明细失败", xml_result)
                lua.Stop(strLuaDEID, "创建收货明细失败", ret_info)
                return
            end
        end
    end

    -- 8. 返回成功
    FinalRes = Create_result("success", "0", "收货单创建成功")
    local xml_result = xml.json_to_xml(FinalRes, "response")
    mobox.returnValue(strLuaDEID, 0, xml_result, 0)
end